Bose ControlSpace User's Guide download pdf (Page 63)

Bose

ControlSpace

™

Designer

™

Software User Guide

Chapter 3: Build a ControlSpace ESP-88 system

In general, signal flow and connections cannot be changed when the

system is online. The following is a partial list of actions that are NOT

allowed when the system is online:

• Changes in wiring between signal processing blocks and

devices

• Adding or removing signal processing blocks and devices

Note: You must go off-line before disconnecting your computer from the

local network.

Downloading settings: connecting to an existing ControlSpace

ESP-88 system

You also have the option to download the system configuration from the

hardware to ControlSpace Designer software. This is useful if you are

connecting to an existing ControlSpace ESP-88 system and you do not

have the original .csp project file. Follow these steps to download an

existing configuration to ControlSpace Designer software:

1. Connect to the ControlSpace local hardware network.

2. Launch ControlSpace Designer software and create a new project

file.

3. Press the Scan button to identify what hardware exists on the

local network. This is necessary for ControlSpace Designer

software to recognize the hardware components that it will upload

to or download from.

Figure 3.27 - Scan button

4. Press the Go on-line button.

Figure 3.28 - Go on-line button

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 220 221

No comments

Bose ControlSpace User's Guide Page 63