Bose ControlSpace User's Guide Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 221
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
Bose
®
ControlSpace
Designer
Software User Guide
74 Chapter 4: Store system programming
Recalling parameter sets
The Recall buttons in the Parameter Sets window are change to orange
when a parameter set is stored. Pressing recall changes the state of all
specified signal processing blocks to the values stored in the parameter
set. You can open the individual signal processing block control panels
and then recall parameter sets to verify that you have stored the correct
settings.
Clearing parameter sets
To clear the contents of a parameter set, right click on the top level of the
tree structure, and select Clear, or press Delete.
Figure 4.23 - Clear a parameter set
Presets
Presets are a snapshot of the state of the entire system including all
signal processing blocks, CC-64 and CC-16 programming. Presets are
also the only way to dynamically change the programming of the CC-64
and CC-16 controllers. Because presets are “global” settings, meaning
they affect every setting of every device, you should only use them if you
want to initialize or change the state of the entire system, or if you need to
change how a CC-64 or CC-16 is programmed.
Note: Presets can only be invoked by a General Purpose Input (GPI) or a
timer. Presets cannot be invoked by a CC-64 or CC-16.
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 220 221

Comments to this Manuals

No comments