Bose ControlSpace User's Guide Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 221
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
Bose
®
ControlSpace
Designer
Software User Guide
120 Chapter 6: Program GPI/O and Serial Input/Output
Controlling a group
Grouped gains can be controlled by GPIs in analog mode, digital mode,
or up/down mode. Drag a group of gain controls into a GPI according to
the following logic:
Digital mode - The external button or switch will control the Mute
status only
Analog mode - The external potentiometer will control Level only
Up/Down mode - The external buttons will control Level only
Discrete mode
When using an external switch or button to control a group in digital
mode, ControlSpace supports a discrete, or 1:1 connection between the
control and the Mute status. This discrete connection can be set to one of
three different modes. You are prompted to choose a mode when you
drag and drop the group into the GPI control input.
Figure 6.7 - Choose a discrete mode
Active Hi. - Grouped state is invoked when the external
control is activated (normally open switch = closed).
Active Lo. - Grouped state is invoked when the external
control is deactivated (closed switch = open).
Toggle - Grouped state is toggled as the external control
is toggled.
Discrete mode is only supported for groups, not for individual gain blocks.
If you want to control an individual gain block with GPI in discrete mode,
you will need to create a group and drag the gain block into the group,
then assign the group to a GPI.
Page view 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 220 221

Comments to this Manuals

No comments