Bose ControlSpace User's Guide download pdf (Page 138)

Bose

ControlSpace

™

Designer

™

Software User Guide

128 Chapter 6: Program GPI/O and Serial Input/Output

Serial Inputs

The ESP-88 has a serial port that can be used to send and receive serial

strings or commands. The serial port is located on the back of the ESP-

88, and is configured for 38,400 baud, no parity, 8 bits, 1 stop bit, and no

flow control. To open the Serial Input control panel, double-click on the

SerialInput block in the ESP-88 window.

Figure 6.16 - Open the Serial Input control panel

You can program your ControlSpace ESP-88 system to recall a snapshot

of a block, or invoke a parameter set when the ESP-88 receives a serial

string. To program a Serial Input, drag and drop one or more blocks or

parameter sets onto a text line in the programming tree of the control

panel. Enter the serial string that is to be recognized by the system in the

corresponding field in the upper half of the control panel. When the

incoming serial string matches any of the eight strings entered, the block

or parameter set programmed for that string is invoked. For example, you

might receive the ASCII string “S2” from an external system indicating

that “scene 2” has been selected, and ControlSpace should invoke the

programmed signal processing block or parameter set.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 220 221

No comments

Bose ControlSpace User's Guide Page 138