Bose CE-1 CONTROL EXPANDER UNIT Operations Instructions Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
49
GB
Amplifier Operations
x SBL DIST. (Surround back left
speaker distance)
x SBR DIST. (Surround back right
speaker distance)
Lets you set the distance from your listening
position to the surround back speakers.
Tip
To enjoy better surround sound, the distance
between the center speaker and the listening position
B cannot be more than 1.5 meters closer than the
one between the listening position and the front
speaker A. Place the speakers so that the difference
in the length of B in the following diagram is no
more than 1.5 meters closer than the length of A.
Example: Adjust the distance B to 4.5 meters or
more when the distance A is 6 meters.
Also, the distance between the surround speakers/
surround back speakers and the listening position
C cannot be more than 4.5 meters closer than the
distance between the listening position and the front
speakers A. Place the speakers so that the
difference in the length of C in the following
diagram is no more than 4.5 meters closer than the
length of A.
Example: Adjust the distance C to 1.5 meters or
more when the distance A is 6 meters.
This is important because incorrect speaker
placement is not conductive to the enjoyment of
surround sound. Please note that placing the
speakers closer than the required will cause a delay
in the output of the sound from that speaker. In other
words, the speaker will sound like it is farther away.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
x SW PHASE (Subwoofer phase
polarity)
Lets you set the subwoofer phase polarity.
NORMAL
Normally, select “NORMAL”.
•REVERSE
Depending on the type of front speakers, the
position of the subwoofer, and the cut-off
frequency of the subwoofer, setting the phase
polarity to “REVERSE” may produce better bass.
Besides bass reproduction, the richness and
tightness of the overall sound may also be
affected. While listening from the main listening
position, select the setting that best suits your
environment.
x SUR POS.
(Surround speaker position)
Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the CINEMA STUDIO EX
modes (page 54).
continued
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

Comments to this Manuals

No comments