Bose CE-1 CONTROL EXPANDER UNIT Operations Instructions Page 34
- Page / 84
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
34
GB
Error codes and remedies
When warning codes appear
During Auto Calibration, the warning code
provides information on the measurement
result. The warning code will appear on the
display cyclically as follows:
Warning code t blank display t (warning
code t blank display)
b)
t PUSH t blank
display t ENTER
b)
Appears when there are more than one warning
code.
You can choose to ignore the warning code as
the Auto Calibration function will
automatically adjust the settings. You can also
change the settings manually.
To change the settings
manually
1 Record down the warning code.
2 Press .
3 Press ?/1 to turn off the receiver.
4 Follow the solution provided in the
“Warning codes and solutions” below.
5 Turn on the receiver and perform Auto
Calibration again (page 32).
Warning codes and solutions
Error code Cause and remedy
ERROR 10 The environment is too noisy.
Make sure the environment is quiet
during Auto Calibration.
ERROR 11 The speakers are placed too near
the optimizer microphone. Place
your speakers further away from
the optimizer microphone.
ERROR 12 None of the speakers are detected.
Make sure that the optimizer
microphone is connected properly
and perform Auto Calibration
again.
ERROR 20 Front speakers are not detected or
only one front speaker is detected.
Check the front speakers
connection.
ERROR 21 Only one surround speaker is
detected. Check the surround
speakers connection.
ERROR 22 The surround back speaker is
connected only to the SPEAKERS
SURROUND BACK R terminals.
When you connect only one
surround back speaker, connect it to
the SPEAKERS SURROUND
BACK L terminals.
ERROR 23 Surround back speaker is detected
but surround speakers are not
connected. Be sure to connect the
surround speakers.
Warning
code
Explanation and solution
WARN. 40 The environment is noisy.
Make sure the environment is quiet
during Auto Calibration.
WARN. 50 The center speaker is not
connected. Be sure to connect the
center speaker.
WARN. 51 The surround speakers are not
connected. Be sure to connect the
surround speakers.
WARN. 52 The surround back speakers are not
connected. Be sure to connect the
surround back speakers.
WARN. 60 The front speaker balance is out of
range. Reposition your front
speakers.
c)
WARN. 62 The center speaker level is out of
range. Reposition your center
speaker.
d)
WARN. 63 The surround left speaker level is
out of range. Reposition your
surround left speaker.
d)
WARN. 64 The surround right speaker level is
out of range. Reposition your
surround right speaker.
d)
WARN. 65 The surround back left speaker
level is out of range. Reposition
your surround back left speaker.
d)
WARN. 66 The surround back right speaker
level is out of range. Reposition
your surround back right speaker.
d)
WARN. 70 The front speaker distance is out of
range. Reposition your front
speakers.
c)
- Home Theatre 1
- About This Manual 2
- On Copyright 3
- Table of Contents 4
- Using the Remote 5
- Additional Information 5
- Front panel 6
- Name Function 7
- Rear panel 10
- 50mA MAX 11
- Remote commander 12
- 1: Installing the speakers 15
- 3 Hang the speakers on the 16
- Connecting the speakers 17
- To connect the speakers 18
- Connecting the subwoofers 19
- CENTER SURROUND BACK 20
- SURROUND 20
- SYSTEM CONTROL 20
- Audio/video 21
- Video signals 21
- Audio signals 21
- 4a: Connecting the audio 22
- Component to be connected 23
- A HDMI cable (not supplied) 24
- C Audio cord (not supplied)* 24
- To enjoy TV multi channel 25
- HDMI features 25
- Notes on HDMI connections 25
- Connecting a DVD player, Blu 26
- B Video cord (not supplied) 27
- D Audio cord (not supplied) 27
- DVD recorder, VCR 28
- Audio signalsVideo signals 28
- (On the front panel) 28
- Camcorder/ 28
- 5: Connecting the 29
- 6: Preparing the receiver 30
- 1 Press ?/1 to turn off the 30
- 7: Calibrating the 31
- 2 Set up the optimizer 32
- 1 Press AMP MENU 32
- 2 Press AUTO CAL 32
- 3 Measurement starts 33
- 4 Measurement ends 33
- Error codes and remedies 34
- When warning codes appear 34
- To change the settings 34
- Warning codes and solutions 34
- (TEST TONE) 35
- Selecting a component 36
- Naming inputs 37
- MASTER VOLUMEINPUT SELECTOR 38
- Watching a DVD/Blu-ray disc 39
- Amplifier Operations 40
- Overview of the menus 41
- Adjusting the level 43
- Adjusting the equalizer 44
- Settings for the surround 44
- Using the surround back 45
- Settings for the tuner 46
- Settings for the audio 46
- Settings for the HDMI 48
- Settings for the system 48
- Calibrating the 50
- Enjoying Dolby Digital 51
- Types of A.F.D. mode 52
- Selecting a pre 53
- Using only the front 55
- (NIGHT MODE) 56
- Listening to FM/AM radio 57
- 1 Press TUNER repeatedly to 57
- 2 Press TUNING + or TUNING – 57
- (Direct Tuning) 58
- Changing the AM tuning scale 58
- Tuning to preset stations 59
- Naming preset stations 60
- “BRAVIA” Sync Features 60
- Preparing for the 61
- “BRAVIA” Sync 61
- Watching a DVD 63
- Enjoying the TV sound 63
- Turning off the receiver 64
- Audio input modes 65
- (DIGITAL ASSIGN) 66
- Enjoying the DIGITAL 67
- MEDIA PORT 67
- 1 Press DMPORT 68
- Changing the display 69
- Using the Sleep Timer 69
- Recording onto a CD-R 70
- Recording onto a recording 70
- Changing button 71
- Glossary 72
- Precautions 74
- Troubleshooting 75
- (not supplied) 78
- Outdoor FM antenna (aerial) 78
- Receiver 78
- To ground 78
- Ground wire 78
- To clear See 79
- Specifications 80
- Printed in Malaysia 84
Related products and manuals for AV receivers Bose CE-1 CONTROL EXPANDER UNIT
(23 pages)© 2020, manymanuals.com. All rights reserved. | 0.829 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals