58
GB
Enter the frequency of a station directly by
using the numeric buttons.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Press D.TUNING.
3 Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4 Press ENTER.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
(Except for models of area code
EA3 only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1 Press TUNER repeatedly to
select AM.
2 Press AMP MENU.
“1-LEVEL” appears on the display.
3 Press V/v repeatedly to select
“4-TUNER”.
4 Press or b to enter the
menu.
5 Press V/v repeatedly to select
“AM STEP”.
6 Press or b to enter the
parameter.
7 Press V/v repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.
Tuning into a station directly
(Direct Tuning)
Changing the AM tuning scale
Comments to this Manuals