Bose CE-1 CONTROL EXPANDER UNIT Operations Instructions download pdf (Page 25)

25

GB

Getting Started

To enjoy TV multi channel

surround sound broadcasting

You can listen to TV multi channel surround

sound broadcasting from the speakers

connected to the receiver.

Connect the OPTICAL output jack of the TV

to the OPTICAL IN jack of the receiver.

HDMI features

• A digital audio signal transmitted by HDMI

can be output from the speakers connect to

this receiver. This signal supports Dolby

Digital, DTS, and Linear PCM.

• This receiver supports Deep Colour,

x.v.Colour and 3D transmission.

• This receiver supports the Control for HDMI

function. For details, see ““BRAVIA” Sync

Features” (page 60).

Notes on HDMI connections

• An audio signal input to the HDMI IN jack

is output from the speaker output jack and

HDMI TV OUT jack. It is not output from

any other audio jacks.

• Video signals input to the HDMI IN jack can

only be output from the HDMI TV OUT

jack. The video input signals cannot be

output from the VIDEO OUT jacks or

MONITOR OUT jacks.

• When you want to listen to the sound from

the TV speaker, set “AUDIO OUT” to

“TV+AMP” in the HDMI menu (page 42). If

you cannot play back multi channel

software, set to “AMP”. However, the sound

will not output from the TV speaker.

• The multi/stereo area audio signals of a

Super Audio CD are not output.

• Audio signals (sampling frequency, bit

length, etc.) transmitted from an HDMI jack

may be suppressed by the connected

component. Check the setup of the

connected component if an image is poor or

the sound does not come out of a component

connected via the HDMI cable.

• Sound may be interrupted when the

sampling frequency, the number of channels

or the audio format of the audio output

signals from the playback component is

switched.

• When the connected component is not

compatible with copyright protection

technology (HDCP), the image and/or the

sound from the HDMI TV OUT jack may be

distorted or may not be output.

In this case, check the specification of the

connected component.

• You can enjoy multi channel Linear PCM

only with an HDMI connection.

• Set the image resolution of the playback

component to 720p, 1080i or 1080p when

you output 96 kHz multi-channel sound over

an HDMI connection.

• You may need to make certain settings on

the image resolution of the player before you

can enjoy multi channel Linear PCM. Refer

to the operating instructions of the player.

• To enjoy 3D images, connect 3D-

compatible TV and video components (Blu-

ray disc player, Blu-ray disc recorder,

“PlayStation 3”, etc.) to the receiver using

High Speed HDMI cables, put on 3D

glasses, and then play back a 3D-compatible

content.

• Depending on the TV or the video

component, 3D images may not be

displayed. Check the 3D image formats

supported by the receiver (page 81).

• Refer to the operating instructions of each

component connected for details.

• Use a High Speed HDMI cable. If you use a

Standard HDMI cable, 1080p, Deep Colour

or 3D images may not be displayed properly.

• We do not recommend using an HDMI-DVI

conversion cable. When you connect an

HDMI-DVI conversion cable to a DVI-D

component, the sound and/or the image may

not be output.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

Comments to this Manuals

No comments