Bose Personalized Amplification System Specifications Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
Setup
Product assembly
1. Place the power stand on the floor. Place it on a
flat, dry, stable surface at the rearmost part of the stage,
handle facing forward, behind the performer.
CAUTION: The completed unit
weighs about 60 lb. Moving the
completely assembed unit is not rec-
ommended.
For placement guidelines, see “Placing the
product in the right location for your perfor-
mance” on page 8.
2. Insert the bottom section of the
Cylindrical Radiator™ loudspeaker
into the power stand. You should
hear a soft click when it is properly
seated and locked in place.
Note: Electrical connections between
the power stand and loudspeaker are
made automatically as you assemble the
product.
4. Connect the remote control to the power stand.
Plug the remote control cable into either end of the
remote. Plug the other end into the Remote jack.
6. Plug in the power stand and turn it on. Plug the
female end of the power cord into the AC Mains jack on
the power stand. Plug the other end into an AC (mains)
receptacle.
3. Mount the top section of the Cylindrical Radiator
loudspeaker. Place one foot on the power stand to
support your back. Insert the bayonet on the top section
into the channel that runs along the
back of the bottom section. Lower
the top section until it is flush with
the top of the bottom section. You
should hear a soft click as the top
section locks in place.
Your Personalized Amplification System™
product is now set up and ready for the
addition of other equipment.
See “Connecting a bass module to the power
stand (optional)” on page 11.
See “Using an effects processor” on page 20.
5. Place the remote control within reach of your
performance position. This will allow you to both hear
your performance and to control it directly.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments