Bose ControlSpace SP-24 User's Guide download pdf (Page 27)

English Installation and Operating Guide Page 27

pro.Bose.com Installation and Operating Guide

Preset Modes

The ControlSpace

SP-24 sound processor comes pre-loaded with loudspeaker Presets for Bose

Professional loudspeakers. Updated

loudspeaker Presets may be available and can be downloaded from pro.Bose.com. See, “Updating Firmware and Loudspeaker EQ

Presets” on page 29 for instructions. Discontinued Bose loudspeaker EQs can be applied through the SP-24 Editor software.

Factory Fixed Routing Table

The loudspeaker Presets are linked to predeﬁned modes for common conﬁgurations of current Bose loudspeakers. Discontinued Bose

loudspeaker EQs can be loaded and applied via the SP-24 Editor software. The following table indicates how each Preset mode affects

input channel routing and ﬁltering at each of the four output channels.

Output Preset Category

Mono Mono HP+Bass Stereo Stereo HP + Bass

1 A+B (Full Range) A+B (HP Filter) A (Full Range) A (HP Filter)

2 A+B (Full Range) A+B (HP Filter) B (Full Range) B (HP Filter)

3 A+B (Full Range) A+B (LP Filter) A (Full Range) A+B (LP Filter)

4 A+B (Full Range) A+B (LP Filter) B (Full Range) A+B (LP Filter)

Note: HP = High Pass (only high frequencies are passed)

LP = Low Pass (only low frequencies are passed)

Full Range = (all frequencies are passed)

Note: Other output conﬁgurations such as four discrete output channels, can be designed using the SP-24 Editor software.

Loading Presets

1. From the home screen, press to edit.

2. Use to navigate to the desired Preset category.

3. Use to locate the desired Preset.

4. Press the SELECT/LOAD button to load the Preset.

Note: On LCD display, an asterisk (*) indicates the currently loaded Preset.

Custom Scenes

The ControlSpace SP-24 sound processor supports the creation of four unique Custom Scenes which may be recalled from either the

front panel or via the SP-24 Editor software. Each Scene represents a unique conﬁguration of comprehensive signal processing param-

eters which are immediately implemented when the scene is recalled. For detailed information on creating Custom Scenes, download

the ControlSpace SP-24 Editor User’s Guide from pro.Bose.com.

To recall a saved Custom Scene using the front panel controls on the sound processor:

1. From the Home Screen, press to edit.

2. Use to navigate to Custom Scenes.

3. Use to locate desired Custom Scene.

4. Press the SELECT/LOAD button to load the selected Custom Scene.

Note: Any parameters set previously in the Utility Menu will be overwritten with data stored in the Custom Scene.

Utility Menu

The Utility Menu allows you to make limited adjustments to the SP-24 sound processor from the front panel. More advanced conﬁgura-

tions can be created using the SP-24 Editor software.

Saving Settings

In the Utility Menu, changes to a parameter setting can be stored immediately by pressing SELECT/LOAD or will automatically store

after sixty seconds of inactivity. To exit the parameter screen, press

Note: When entering a parameter screen, the initial value displayed is the current active parameter setting.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comments to this Manuals

No comments

Bose ControlSpace SP-24 User's Guide Page 27

Comments to this Manuals

Related products and manuals for Audio amplifiers Bose ControlSpace SP-24