Bose ControlSpace SP-24 User's Guide download pdf (Page 23)

English Installation and Operating Guide Page 23

pro.Bose.com Installation and Operating Guide

Hardware Installation

Rack Mounting the Chassis

The chassis requires one 1.75" (44 mm) rack space unit (1RU) in a standard 18" (457 mm) deep rack. To secure the chassis to the rack,

use four screws with washers (not provided) to prevent marring the front panel.

Tip: Use of neoprene rubber washers are a good choice because they grip the screw head and prevent the screws from backing out

from vibration or during transportation.

Spacing

When mounting adjacent to heat generating products such as power ampliﬁers, allow a 1RU open space between the SP-24 sound

processor and the ampliﬁer to allow for air ﬂow.

Connections

Audio Connections Power Connection

The ControlSpace

SP-24 sound processor has two balanced

XLR analog inputs and four balanced XLR analog outputs

for connection with a variety of professional-level audio

equipment.

The ControlSpace SP-24 sound processor uses a universal power

supply for worldwide use. AC power connection is made using

the included power cord. Insert the proper power cord for the

voltage used in your region.

A digital device, pursuant to Part 15

gainst harmful interference when

rates, uses, and can radiate radio

on manual, may cause harmful

ntial area is likely to cause harmful

at his own expense.

SP-24

Ampliﬁer

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

No comments

Bose ControlSpace SP-24 User's Guide Page 23