Bose Solo TV 15 Technical Information download pdf (Page 8)

System Setup

8 - English

Step 1: Placing the system

1. Move your TV aside and turn it so you can see the Audio Out panel.

2. Place the Solo system where you had your TV.

Placement guidelines:

• The Bose

Solo 15/10 system is designed to ﬁt under TVs that weigh no more than

75 lbs (34 kg) and have bases no wider than 24" (61 cm), and no deeper than 12.25"

(31 cm).

• The base of your TV should be centered on the top of the system and must not

hang over any of its edges.

• If the TV base is too large to ﬁt on top of the system, place the sound system in

another location such as on an open shelf under the TV, but keep it close to your

TV so the audio cable will reach. You can also mount your TV on the wall above

the system.

• If placing the sound system in a cabinet or on a shelf, position the front of the

system as close as possible to the front edge of the shelf for optimum audio

performance.

Cautions:

• DO NOT place a CRT type TV on this system. It is not designed for use with this

type of TV.

• Allowing the base of your TV to hang over any edge of this speaker system in-

creases the risk of the TV tipping, which may result in injury.

• If placing the sound system backed up to a wall, make sure there is a space of at

least 1" (2.5 cm) between the wall and the rear of the system.

• With any placement of this product, make sure the ventilation openings on the rear

panel are not blocked.

• If your TV comes with an anti-tip device, install it according to the manufacturer’s

instructions and adjust the tether as instructed after placing the TV on top of the

system. Installing an anti-tip device is recommended when using a TV with this

product. If your TV did not come with an anti-tip device, you can get one from

most retail TV suppliers.

TV Audio OUT panel

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 99 100

No comments

Bose Solo TV 15 Technical Information Page 8