Bose Wave PCinteractive Operations Instructions download pdf (Page 10)

10 April 12, 2001 PDF259774_00

System Setup

Connecting the Wave/PC

™

unit to your computer

This step tells you how to connect the Wave/PC unit to your computer using the cable sup-

plied with your Wave/PC system. Illustrations of the two most typical computer connection

panels are provided (Figure 6 and Figure 7). Refer to the ﬁgure that best represents your com-

puter and the following steps.

Note:

If you are using stereo speakers with your computer, disconnect them before continu-

ing with this procedure.

1. Turn your computer off.

2. Insert the DIN connector of the Wave/PC system cable into the DIN socket on the rear

panel of the Wave/PC unit (Figure 6 or Figure 7).

3. Connect the serial data port (DB-9) connector of the Wave/PC system cable to the serial

(RS232) data port of your computer (Figure 6 or Figure 7).

4. Connect the audio plug (3.5 mm) of the Wave/PC system cable to the audio output jack

of your computer (Figure 6 or Figure 7).

CAUTION:

Do not connect the Wave/PC unit to an AC (mains) outlet until after connecting

your Wave/PC unit to your PC.

Figure 6

Example 1: Wave/PC sys-

tem connections

Audio plug

Serial data

port (DB9)

connector

Audio

output

jack

Serial data

port

DIN socket

DIN connector

Wave/PC system cable

Rear panel of computer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

No comments

Bose Wave PCinteractive Operations Instructions Page 10