Bose Wave PCinteractive Operations Instructions download pdf (Page 26)

26 April 12, 2001 PDF259774_00

Operating the CD Player/Recorder

Select “Record using error correction” to decrease the probability of audio errors during

recording.

The Wave/PC

™

application can test your CD-ROM drive to determine its digital audio extrac-

tion speed and tell you whether or not it can support simultaneous record and playback.

To test your CD-ROM drive:

1. Insert the Wave/PC installation disk in your CD-ROM drive.

2. If you have more than one CD-ROM drive, select the drive you will use to play CDs from

the CD-ROM Drive drop list. If you do not select a drive, the software wil choose the drive

with the lowest letter. (If you have a single drive in your computer, the drop list is hidden.)

3. Click the Test CDROM drive button.

4. Click the Begin button in the CD-ROM Drive Test window.

5. When the test is complete, the results are shown.

The results may describe one of the following three conditions:

Displayed Results Meaning

Digital audio extraction speed [0 to <1.1]X.

It appears that the CD-ROM drive does not

support digital audio. You will most likely not be

able to record or playback.

Your CD-ROM drive is too slow. You will

need to upgrade your CD-ROM drive to

record CDs.

Digital audio extraction speed [1.1 to <3]X.

The CD-ROM drive supports digital audio.

However, it does not appear fast enough to

simultaneously record and playback.

Your CD-ROM drive is not fast enough to

playback and record at the same time. In

order to record your CDs, you will need to

stop playback.

Digital audio extraction speed [3 and greater]X.

The CD-ROM drive supports digital audio. It

appears to be fast enough to simultaneously

record and playback.

You can record and playback CDs at the

same time.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

No comments

Bose Wave PCinteractive Operations Instructions Page 26