Bose Lifestyle DVD Home Entertainment Systems Operations Instructions download pdf (Page 36)

36

US

2 Press C/c to select [Setup].

3 Press X/x to select [Audio Settings],

then press .

4 Press X/x to select [Auto Calibration],

then press .

The confirmation display for [Auto

Calibration] appears.

5 Connect the calibration mic to the

A.CAL MIC jack on the rear panel.

Set up the calibration mic at ear level using

a tripod, etc. (not supplied). The front of

each speaker should face the calibration

mic, and there should be no obstruction

between the speakers and the calibration

mic.

6 Press X/x to select [OK].

To cancel, select [Cancel].

7 Press .

[Auto Calibration] starts.

The system adjusts the speaker settings

automatically.

Be quiet during the measurement.

• Before [Auto Calibration], make sure that the

surround amplifier is turned on and you install

the surround amplifier in an appropriate location

to ensure wireless connection with it.

8 Confirm the result of [Auto

Calibration].

The distance and level for each speaker

appear on the TV screen.

• If measurement fails, follow the message then

retry [Auto Calibration].

9 Press X/x to select [OK] or [Cancel],

then press .

x The measurement is OK.

Disconnect the calibration mic, then select

[OK]. The result is implemented.

x The measurement is not OK.

Follow the message, then select [OK] to

retry.

• While [Auto Calibration] is in progress, do not

operate the system.

• You can change the unit of measurement (feet or

meters) by pressing the color button (RED).

Setting the Speakers

[Speaker Settings]

To obtain the best possible surround sound, set

the speakers’ distance from your listening

position. Then use the test tone to adjust the

balance of the speakers.

1 Press HOME.

The home menu appears on the TV screen.

2 Press C/c to select [Setup].

3 Press X/x to select [Audio Settings],

then press .

4 Press X/x to select [Speaker Settings],

then press .

The [Speaker Settings] display appears.

5 Press X/x to select the item, then press

.

Check the following settings.

x [Distance]

When you move the speakers, be sure to set the

parameters of the distance from the listening

position to the speakers.

You can set the parameters from 0 to 23 feet (0.0

to 7.0 meters).

[Front Left/Right] 10 ft/3.0 m

: Set the front

speaker distance.

[Center] 10 ft/3.0 m: Set the center speaker

distance.

[Surround Left/Right] 10 ft/3.0 m: Set the

surround speaker distance.

[Subwoofer] 10 ft/3.0 m: Set the subwoofer

distance.

• You can change the unit of measurement (feet or

meters) by pressing the color button (RED).

x [Level]

You can adjust the sound level of the speakers.

You can set the parameters from –6.0 dB to +6.0

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Comments to this Manuals

No comments