Bose Lifestyle DVD Home Entertainment Systems Operations Instructions download pdf (Page 44)

[16bit], [12bit], [10bit]: Outputs 16bit/12bit/

10bit video signals when the connected TV is

compatible with Deep Color.

[Off]: Select this when the picture is unstable or

colors appear unnatural.

x [SBM] (Super Bit Mapping)

[On]: Smooths the gradation of video signals

output from the HDMI (OUT) jack.

[Off]: Select this when outputting distorted

video signals or unnatural color.

x [Pause Mode] (BD/DVD VIDEO/DVD-R/

DVD-RW only)

[Auto]: The picture, including subjects that

move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects that do

not move dynamically, is output in high

resolution.

[Audio Settings]

x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing the

interactive audio and secondary audio to the

primary audio.

[Off]: Outputs the primary audio only.

x [Audio DRC]

You can compress the dynamic range of the

sound track.

[Auto]

: Performs playback at the dynamic range

specified by the disc (BD-ROM only).

[On]: The system reproduces the sound track

with the kind of dynamic range that the

recording engineer intended.

[Off]: No compression of dynamic range.

x [Attenuate - AUDIO]

Distortion may occur when you listen to a

component connected to the AUDIO (AUDIO

IN L/R) jacks. You can prevent distortion by

attenuating the input level on the unit.

[On]

: Attenuates the input level. The output

level will decrease at this setting.

[Off]: Normal input level.

x [Audio Output]

You can select the output method where the

audio signal is output.

[Speaker]: Outputs multi-channel sound from

the system’s speakers only.

[Speaker + HDMI]

: Outputs multi-channel

sound from the system’s speakers and 2-channel

linear PCM signals from the HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI (OUT)

jack only. Sound format depends on the

connected component.

• When [Control for HDMI] is set to [On] (page 46),

[Audio Output] is set to [Speaker + HDMI]

automatically and this setting cannot be changed.

• When [Audio Output] is set to [HDMI], the output

signal format for the “TV” function is 2-channel

linear PCM.

x [Sound Effect]

You can set the system’s sound effects (SOUND

MODE setting

(page 23)) on/off.

For a 2-channel source, you can select [Dolby

Pro Logic], [DTS Neo:6 Cinema], or [DTS

Neo:6 Music] to simulate surround sound.

[Sound Mode On]

: Enables the surround effect

of the sound mode (page 23). The sampling

frequency upper limit is set to 48 kHz.

[Dolby Pro Logic]: The system simulates

surround sound from 2-channel sources and

outputs sound from all the 5.1 channel speakers

(Dolby Pro Logic decoding).

[DTS Neo:6 Cinema]/[DTS Neo:6 Music]: The

system simulates surround sound from

2-channel sources and produces 6.1 channel

sound (DTS Neo:6 Cinema/DTS Neo:6 Music

mode decoding).

[Off]: The sound effects are disabled. You can

hear sound as it is recorded.

x [Speaker Settings]

To obtain the best possible surround sound, set

the speakers. For details, see “Setting the

Speakers” (page 36).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Comments to this Manuals

No comments

Bose Lifestyle DVD Home Entertainment Systems Operations Instructions Page 44

Comments to this Manuals