Bose Aviation Headset X Technical Information download pdf (Page 12)

Preparing the Bose

Aviation Headset X

Attaching the boom microphone cable

Attach the boom microphone cable to the earcup as follows:

1. Ensure that the cable connector and the mating earcup

connector are clean and free of debris.

2. Retract the headset to its fully-closed position and ensure

the earcups are together.

3. Place the cable into position.

4. Ensure that the cable connector is properly aligned with

the earcup connector pins. If not aligned properly, damage

may result.

5. Gently push the connector until it is fully engaged and

the cable is seated against the earcup. Do not apply

excessive force as earcup damage may result.

6. Ensure that the screw threads are properly started and

tighten screws.

7. Rotate the microphone boom into the proper position.

8. Test headset operation before flight.

Attaching the connector access cover

Attach the connector access cover to the earcup as follows:

1. Place the connector access cover into position.

2. Ensure that the screw threads are properly started and

tighten screws.

Battery

If your headset is battery operated, install a fresh 9-volt alkaline battery

into the control module, as described in General Care and Mainte-

nance on page 26.

Warranty card

The Bose Aviation Headset X comes with a warranty card. Please

supply the requested information to help Bose provide you with

advisories and updates. Copy the serial number, located beneath the

headband cushion, onto the warranty card and mail it to Bose.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Bose Aviation Headset X Technical Information Page 12