Bose Aviation Headset X Technical Information download pdf (Page 24)

General Care and Maintenance

Cleaning instructions (cont.)

Wind screen

Remove the wind screen from the microphone as described in Replac-

ing the wind screen on page 26. Wash the wind screen by immersing

in mild soapy water. Rinse, air-dry, and reattach the wind screen.

Protective inner screen

The inner screen, shown in Figure 11, is critical to proper headset

operation. Do not attempt to remove, replace, repair, or clean this

component. If operating problems develop, contact the Bose

Aviation

Headset Department.

Headband cushion

To clean the headband cushion, follow these steps:

1. Remove the cushion as described in on page 27.

2. Place the cushion in a solution of water and a mild detergent such

as Woolite.

3. Allow the cushion to air dry. Then, reattach by following the

instructions on page 27.

Removing environmental moisture

If the protective inner screen becomes dampened by environmental

moisture such as light rain, dew, perspiration, or condensation, remove

the moisture by air-drying only. Do not use electric heaters, blowers, or

hair-dryer type devices to dry the inner screen. If the headset is

immersed in liquid, do not use it. Contact the Bose

Aviation Headset

Department for assistance.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Bose Aviation Headset X Technical Information Page 24