Bose Aviation Headset X Technical Information download pdf (Page 11)

Preparing the Bose

Aviation Headset X

Attaching or relocating the boom microphone cable

Detaching the boom microphone cable or connector access cover

If necessary, remove the boom microphone cable or the connector

access cover from the earcup as follows:

1. Loosen the two captive screws using a flat-tipped

screwdriver (see Figure 2).

2. Pull the cable or the cover away from the earcup in a

direction parallel to the screw axes.

Note:

Do not twist the boom microphone cable while disconnecting.

Twisting can damage the connector pins.

Preparing the Bose Aviation Headset X for use

Most Bose headsets are shipped with the boom microphone cable

attached. Some headset configurations are shipped with the cable

packed separately in the shipping container. All headset configurations

allow the boom microphone cable to be attached to either earcup, at

the user’s option.

Figure 2

Attaching the boom

microphone cable

connector

access

cover

boom

microphone

cable

loosen screws

several turns

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

No comments

Bose Aviation Headset X Technical Information Page 11