Technical Information.
..continued
General Description
.
..continued
• Music on Hold: Provides an output
for simple integration into a phone
system.
• Room Equalization: Provides easy
adjustment of tonal balance in each
zone.
• Limiting: Protects loudspeakers from
unwanted transient power loads.
• Signal Routing: Allows for an input
source to be routed to any of the
four amplifier outputs.
• System Diagnostics: Generates an
extensive error log and includes an
easy-to-replace memory module to
minimize downtime.
• RS-232 for connection to a PC.
• Remote Power Sequencing: Provides
a contact closure input.
The system shall use a digital signal
processing architecture running at a
44.1 kHz sample rate. The frequency
response shall be from 20 Hz to
20 kHz (±3dB). The signal-to-noise
ratio shall be greater than 100dB
A-weighted.
The power amplifier section shall
deliver 400W of maximum power
with less than 1.0% THD from
20 Hz to 20 kHz (±3dB). Channel
separation shall be >70dB, 20 Hz
to 20 kHz.
The system shall consume power of
60 watts or less at idle, 200 watts
with musical program, 600 watts at
maximum continuous rated power
(1 kHz, sine wave input) 70V or
100V mode.
E-4 System Engineers’ and Architects’ Specifications
The system shall run the following
algorithm and controls:
• Input Gain
• Input Trim
• Source Leveling
• Mic/Line/Page Assignment
• Opti-Voice
®
paging
• Signal Routing
• Auto Volume Setup
• Scheduling
• Dynamic EQ
• Music on Hold
• Room EQ
• Loudspeaker EQ for Bose
®
speaker
products
• Output Level Control Scheduling
• Limiting
• System Diagnostics
The system shall weigh 30 lb
(13.6 kg).
The system enclosure construction
shall be a steel chassis designed for
rack or shelf mounting.
The system shall be the FreeSpace
®
E-4 system from Bose.
Power Requirements ( 10%)
120 VAC/50-60 Hz
220 VAC/50-60 Hz
240 VAC/50-60 Hz
100 VAC/50-60 Hz
Fusing/Protection
120V: T6.25A, 250V rated
240V: T3.15A, L250V
Size (H x W x D)
5.25" (3U) x 17.25" x 15.5"
(13.3 cm x 43.8 cm x 39.4 cm)
Weight
30 lb (13.6 kg)
Enclosure Construction
Steel chassis designed for rack or
shelf mounting
Comments to this Manuals