Bose LIFESTYLE VS-2 User Manual download pdf (Page 29)

OPTIONAL CONNECTIONS AND ADDITIONS

Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol

Using the IR emitter

If a component does not respond to the LIFESTYLE

system remote control commands,

the IR (infrared) signals may not be reaching it. Try moving the component or media center

slightly to see if that improves the response.

If there is still a problem, connect the supplied IR emitter to establish a solid response while

setting your LIFESTYLE

remote to control this component. You may not need to use the

emitter after that. Or keep it connected, as needed, for use with one component.

Note: For information on how to set the LIFESTYLE

remote to control the TV, refer to your

Operating Guide.

To connect the IR emitter:

1. Insert the plug into the IR Emitter connector on the media center connection

panel (Figure 20).

2. Place the other end of the cable near the component with the rounded surface of the

emitter facing the component.

3. Operate the component to see if it responds to remote commands. Move the emitter

around, if necessary, to find the best position.

4. Use the double-sided tape enclosed with the emitter to affix it in position near the

component.

Figure 20

IR emitter connector

location

Note: To purchase an add-on IR emitter for use with up to three components, or for replacement

of the supplied emitter, contact Bose

Customer Service. Refer to the address list included in the

carton.

Using a remote control antenna extender

If your system does not respond to remote control commands, but you know the remote

batteries are good, you may need to add an antenna extender to help the remote work within

its specified range. To contact Bose to purchase an extender, refer to the address list

included in the carton.

IR Emitter

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 112 113

No comments

Bose LIFESTYLE VS-2 User Manual Page 29