Bose Lifestyle 28 Installation Guide download pdf (Page 13)

System Installation Instructions

Connecting the Acoustimass

module to the media center

Connect the Acoustimass module to the media center with the audio input cable (Figure 10).

Note: Be sure that each connector is fully inserted into each jack.

1. Plug the small black multi-pin connector (ﬂat side facing up) into the SPEAKER ZONES

jack labeled “1” on the back of the media center.

2. Insert the telephone-style RJ-45 connector on the other end of the audio input cable into

the AUDIO INPUT jack on the Acoustimass module. When properly connected, it should

lock in place.

Note: Refer to “Setting up a second listening zone” on page 25 for information on connecting

a second zone.

Figure 10

Acoustimass module con-

nection to media center

CAUTION: Do not place strain on the audio input cable, especially on the connection to the

Acoustimass module. Placing excessive strain on the cable may cause damage to the cable

connection at the Acoustimass module. When disconnecting the cable from the Acoustimass

module, be sure to press the tab on the connector.

SENSOR

EMITTER

SERIAL

DATA

SPEAKER

ZONES

1.1A

33V DC POWER

FM 75

ANTENNA

OPTICAL OPTICAL

INPUT

OUTPUT

AUDIO OUTPUTS

DIGITAL DIGITAL

RECORD

DIGITAL

TAPE

AUDIO INPUTS

AUX VCR TV

VIDEO INPUTS

COMPOSITE S-VIDEO

VIDEO OUTPUTS

OUTPUTS TO

CUBE SPEAKERS

AUDIO

INPUT

POWER

FRONT SURROUND

100-120/200-240V AC

50/60 Hz

350W MAX.

Audio input cable

Acoustimass module

connector panel

Note: Press tab to release cable connector.

When fully inserted into the jack, the connector

locks in place.

AM259777_02_V.pdf • April 23, 2002

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Bose Lifestyle 28 Installation Guide Page 13

Comments to this Manuals

Related products and manuals for Audio amplifiers Bose Lifestyle 28