Bose Lifestyle 28 Installation Guide download pdf (Page 12)

System Installation Instructions

Making a plug-in cable speaker connection

In a plug-in cable connection (Figure 8), the positive and negative wires are oriented to ensure

proper polarity.

Figure 8

A plug-in cable type

speaker

1. Match the correct cable to the corresponding speaker location. Front speaker cables

have blue RCA connectors at one end, with L (left), R (right), or C (center) molded into

both the RCA connectors and the speaker connectors at the other end. Surround

speaker cables have orange RCA connectors at one end, with L (left) or R (right) molded

into both the RCA connectors and the speaker connectors at the other end.

2. Insert the speaker connector of each cable fully into the jack on the rear of each of the

ﬁve speakers. Match the ridge of the connector to the notch at the top of the jack.

3. Connect each cable to the corresponding jack on the Acoustimass

module (Figure 9).

Plug the blue connectors into the matching left front, center, and right front jacks. Plug

the orange connectors into the matching left surround and right surround jacks.

Figure 9

Speaker connections to the

Acoustimass module

OUTPUTS TO

CUBE SPEAKERS

AUDIO

INPUT

POWER

FRONT SURROUND

100-120/200-240V AC

50/60 Hz

350W MAX.

Front speakers

Left Center Right

Surround speakers

Left Right

To FRONT L

To FRONT C

To FRONT R To SURROUND L

To SURROUND R

AM259777_02_V.pdf • April 23, 2002

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Bose Lifestyle 28 Installation Guide Page 12