Bose 2150 Specifications Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
13
English
4.2 Rear panel (cont.)
FX Loop in/out
Engages or bypasses the FX loop. ON (on) allows signals to pass through the FX loop. OFF
(off) closes the loop internally.
A four-pin barrier block connector is provided on each channel. The FX loop can be used to
send and receive unbalanced signals from outboard signal processing equipment such as
EQs, Delays, Limiters, etc. To activate the FX loop, set the dip switch to the ON position.
The send pins (+ and ) are always active and can be used to daisy chain the signal from
one amp to another amp via the receiving amplifiers normal input. The return pins are
activated by the FX dip switch.
Clip limiter
Select between ON and OFF. When set to ON, the clip limiter will engage when the output
stage exceeds 0 dB, preventing output stage clipping. When set to OFF, there is no clip
limiter in the signal chain.
High-pass filter on/off
Selects whether the high-pass filter is ON or OFF. When set to ON, the high-pass filter will
default to the selection made on the 80Hz/120Hz dip switch. When set to OFF, there is no
high-pass filter in the the signal chain.
120Hz/80Hz (12dB/octave high-pass filter)
Selects the frequency for the high-pass filter. Selectable between 120Hz and 80Hz.
4.0 Operation
J20018292
SEND
RECV
SEND RECV
120VAC, 4.6A max.
60 Hz
600W
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference and (2) this device must
accept any interference received, including interference which may cause undesired operation.
Complies with Canadian ICES-003 Class A specifications.
PN# 1234567
SEQUENCE REMOTE LEVEL
WARNING
RISK OF HAZARDOUS
ENERGY! MAKE PROPER
SPEAKER CONNECTIONS.
SEE OPERATING
MANUAL BEFORE USING.
AVERTISSEMENT
ENERGIE ELECTRIQUE
DANGEREU SE. VOIR
LANOTICE
DE FONCTIONNEMENT.
++
COM CH2 CH1 +5V
Com
4
8
25V
35V
50V
70V
100V
Com
4
8
25V
35V
50V
70V
100V
For bridged operation.
Consult user manual.
Use Class 2 Wiring
FX CH 1
CH 2 CH 1
FX CH 2
CH 2 CH 1
D.O.M.:
SERIAL No.:
BOSE CORPORATION
FRAMINGHAM, MA 01701-9168 U.S.A.
MADE IN U.S.A. OF DOMESTIC AND FOREIGN COMPONENTS.
CAUTION AVIS
RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVER,
AUTHORIZED PERSONNEL
ONLY.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR CE CARTER,
RESERVE AU PERSONNEL
AUTORISE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
SND RCV
®
OFF
80 Hz
OFF
OUT
ON CLIP
120 Hz
ON HP
IN FX
OFF
80 Hz
OFF
OUT
ON CLIP
120 Hz
ON HP
IN FX
+
INPUT IMPEDANCE 25K OHMS EACH LEG TO GROUND (TOTAL 50K OHMS BALANCED)
SEQUENCE
EQUALIZATION
SEND RECEIVE
12
3
ON
CH2
CH1
INPUT CH 2 INPUT CH 1
CH2 EQ. OUT
CH1
12
3
12
3
PUSH PUSH
++
Model 2150
2
4
5
6
1
9
7
8
3
10
1
Standard Input Module
2
Input Connectors
3
EQ Out Connectors
4
Equalizer Present LEDs
5
Speaker Outputs
6
Effects Loop
7
Dip Switches
8
AC Power Sequence Connector
9
Remote Level Control
10
IEC Power Cord
AM264080_00_V.pdf • June 21, 2002
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Comments to this Manuals

No comments