Bose 2150 Specifications Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
English
4.2 Rear Panel
Input Modules
1. Standard input module
Through the use of the Bose
®
input module (the standard module provided with the ampli-
fier) and EQ cards, Bose Model 2150 amplifier can provide active equalization for Bose
Model 8, Model 32, Model 32SE, 402
®
, 502
®
A, 502B and 802
®
Series II professional loud-
speakers.
Each channel of the input module has its own EQ card input connector, which allows
independent equalization for each channel. For a view of the input module, refer to Figure
31 on page 28.
2. Input connectors
A combination
1
4
" TRS/XLR input connector on the input module allows for either a
1
4
" TRS
(Tip-Ring-Sleeve) input or a XLR input. The input module quick-connect terminal block is
wired in parallel with the TRS/XLR input connector. This allows for easy connection of
stripped wires to the provided connector. Two parallel input connectors allow for simple
connection of parallel amplifiers. Only one connection per channel can be used.
Note:
When using the standard input module in mono mode, use CH 2 input only.
4.0 Operation
J20018292
SEND
RECV
SEND RECV
120VAC, 4.6A max.
60 Hz
600W
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference and (2) this device must
accept any interference received, including interference which may cause undesired operation.
Complies with Canadian ICES-003 Class A specifications.
PN# 1234567
SEQUENCE REMOTE LEVEL
WARNING
RISK OF HAZARDOUS
ENERGY! MAKE PROPER
SPEAKER CONNECTIONS.
SEE OPERATING
MANUAL BEFORE USING.
AVERTISSEMENT
ENERGIE ELECTRIQUE
DANGEREU SE. VOIR
LANOTICE
DE FONCTIONNEMENT.
++
COM CH2 CH1 +5V
Com
4
8
25V
35V
50V
70V
100V
Com
4
8
25V
35V
50V
70V
100V
For bridged operation.
Consult user manual.
Use Class 2 Wiring
FX CH 1
CH 2 CH 1
FX CH 2
CH 2 CH 1
D.O.M.:
SERIAL No.:
BOSE CORPORATION
FRAMINGHAM, MA 01701-9168 U.S.A.
MADE IN U.S.A. OF DOMESTIC AND FOREIGN COMPONENTS.
CAUTION AVIS
RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVER,
AUTHORIZED PERSONNEL
ONLY.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR CE CARTER,
RESERVE AU PERSONNEL
AUTORISE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
SND RCV
®
OFF
80 Hz
OFF
OUT
ON CLIP
120 Hz
ON HP
IN FX
OFF
80 Hz
OFF
OUT
ON CLIP
120 Hz
ON HP
IN FX
+
INPUT IMPEDANCE 25K OHMS EACH LEG TO GROUND (TOTAL 50K OHMS BALANCED)
SEQUENCE
EQUALIZATION
SEND RECEIVE
12
3
ON
CH2
CH1
INPUT CH 2 INPUT CH 1
CH2 EQ. OUT
CH1
12
3
12
3
PUSH PUSH
++
Model 2150
2
4
5
6
1
9
7
8
3
10
1
Standard Input Module
2
Input Connectors
3
EQ Out Connectors
4
Equalizer Present LEDs
5
Speaker Outputs
6
Effects Loop
7
Dip Switches
8
AC Power Sequence Connector
9
Remote Level Control
10
IEC Power Cord
AM264080_00_V.pdf • June 21, 2002
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 38 39

Comments to this Manuals

No comments