Bose 18 User Manual download pdf (Page 11)

System Installation

English

Figure 7

Connecting speaker cables

to the cube speakers

1. Match the correct cable to the corresponding speaker location. Front speaker cables

have blue connectors at one end, with L (left), R (right), or C (center) molded into the con-

nectors. The red collars on the + wire are labeled LEFT, RIGHT, and CENTER. Surround

speaker cables have orange connectors at one end, with L (left) or R (right) molded into

the connectors. The red collars on the + wire are labeled LEFT and RIGHT.

2. Connect the wire end of one speaker cable to the terminals on the rear of the matching

speaker. Press the terminal tab on the back of the speaker and insert the marked wire (+)

into the red terminal and the plain wire (–) into the black terminal. Release the tab to

secure the wire. Repeat this step for each of the ﬁve speakers.

3. Connect each cable to the corresponding jack on the Acoustimass

module (Figure 8).

Plug the blue connectors into the matching left front, center, and right front jacks. Plug

the orange connectors into the matching left surround and right surround jacks.

Figure 8

Speaker connections to the

Acoustimass module

Terminal tab

Red (+) wire

OUTPUTS TO

CUBE SPEAKERS

AUDIO

INPUT

POWER

FRONT SURROUND

100-120/200-240V AC

50/60 Hz

350W MAX.

Front speakers

Left Center Right

Surround speakers

Left Right

FRONT L FRONT C FRONT R SURROUND L SURROUND R

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Bose 18 User Manual Page 11