Bose ControlSpace AMS-8 User's Guide download pdf (Page 11)

English

The ControlSpace AMS-8 Local Input Module allows to use the central sound system for sound sources

that can be plugged in locally, e.g. a CD player, a microphone or a laptop for a presentation or movie.

The level of the microphone gain can be adjusted.

1. AUDIO INPUT (RCA) – Input Left and Right for a local audio source input

2. MICROPHONE INPUT (XLR) – Input socket for a local microphone

3. MICROPHONE GAIN ADJUSTER – Adjuster to adjust the gain

Turn the adjuster anti clockwise to decrease the gain with a minimum of 32dB.

Turn the adjuster clockwise to increase the gain to a max of 66dB. The factory gain setting is 38dB.

If one uses the audio and the microphone input, both signals will be audible.

The CS-LIM can be configured so the inputs are available in all rooms or only in the specific room

where it is installed.

3.3 ControlSpace

™

AMS-8 Local Input Module (CS-LIM)

3. System control

3.4 ControlSpace

™

AMS-8 Paging Panel (CS-PP)

1. ROOM SELECTION BUTTONS – By pressing a room button one selects a specific room or zone

(group of zones) for paging. The indicator (led) next to the button lights up green when it is selected.

Room blocking: By pressing a room button for 2 seconds, the indicator next to it will light up red. This means

this room is now blocked for paging. Press the same button again for 2 seconds to release the ‘block’ situation.

2. MESSAGE

BUTTONS – One can page a pre-recorded message by first selecting the required room(s)

followed by pressing the appropriate message button. To stop a playing message, one should press

the same message button again. The paging function still has a higher priority: during a pre-recorded

message anouncement the microphone can be used to override this message.

This function is only available if the optional message storage card is installed and pre-recorded messages

are stored on this card.

3. SELECT ALL BUTTON – By pressing the ‘select all’ button all rooms are selected (except the blocked rooms).

4. DESELECT ALL BUTTON – By pressing the ‘deselect all’ button all rooms are deselected.

5. TALK BUTTON –

After pressing the talk button the indicator just above this button lights up red, at the same

time a chime signal is activated and routed the selected rooms. As soon as this indicator turns green one can

page a live spoken message, as long as the button is pressed. Releasing this button will stop the paging.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Bose ControlSpace AMS-8 User's Guide Page 11