Bose FREESPACE 4400 Specifications download pdf (Page 18)

15 of 66

4.0 Hardware Installation

4.5 Rack mounting the FreeSpace

4400 system

The FreeSpace 4400 system requires three 1.75" (44 mm) rack

space units with a 16" (406 mm) inside depth (including the rear

supports). When mounting, use four screws with washers to pre

vent marring the front panel. Neoprene rubber washers are a

good choice because they grip the screw head and prevent the

screws from backing out from vibration or during transportation.

Installer’s Note: If the FreeSpace 4400 system is to be

transported while mounted in a rack, be advised that the rear

of the FreeSpace 4400 system must be mechanically sup-

ported. Install a shelf under the unit or use brackets in such a

way as to support the rear of the unit. Failure to use proper

mounting hardware may result in damage to the FreeSpace

4400 system during transport.

Attaching rack ears to the FreeSpace 4400 chassis

Attaching the FreeSpace 4400 chassis to the

rack (mounting screws not provided)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

No comments

Bose FREESPACE 4400 Specifications Page 18