Bose Acoustimass 20 Technical Information download pdf (Page 16)

16 October 29, 2001 AM25212_02_V.pdf

Cleaning your speakers

Wipe the cube speakers using a damp cloth. Do not use solvents or chemicals. Do not allow

liquids to spill on or objects to drop into the Acoustimass

module or the speaker grilles. You

may vacuum the grilles carefully; the drivers are directly behind the grille cloth. No other

maintenance is needed.

Troubleshooting

If you have a problem with your Acoustimass 6 speaker system, turn off your sound source

and try the solutions below. If you still have a problem, contact your Bose

dealer to arrange

for service. To contact Bose directly, refer to the inside back cover of this guide.

Problem What to do

System does not function • Make sure the power cord of the receiver is plugged into an operating AC wall outlet and

at all. the receiver is turned on.

• Be sure to select a source at the receiver (video, CD, tuner).

No sound • Check the cube speaker and Acoustimass module connections. Turn on the receiver.

• Check connections of external components to the receiver.

• Increase the volume.

• Disconnect any headphones.

No surround sound • If your surround sound receiver is Pro-Logic, be sure your receiver is connected to a stereo

sound source (TV, VCR, laserdisc or DSS player) by an RCA stereo cable. If the receiver is

connected directly to a stereo television, make sure that all other program sources (VCR,

laserdisc or DSS player) are connected to the TV using RCA stereo cables as well.

• If your surround sound receiver is Dolby Digital (AC-3), be sure the sound source (DSS,

laserdisc or DVD player) is connected directly to your receiver as shown in the owner’s

guide.

• On your TV, turn off enhanced surround sound, if available. Set your TV for stereo only.

Maintaining Your Acoustimass

6 Speaker System

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Bose Acoustimass 20 Technical Information Page 16