Bose ControlSpace CC-16 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
PROFESSIONAL SYSTEMS DIVISION
ControlSpace
ESP-88
Engineered Sound Processor
pro.bose.com
4
OF 4
GPIO expansion card to increase the system’s
general purpose inputs and outputs to 16 each. Unit
shall also support a DSP expansion card which
includes 3 Texas Instruments TMS320C6713 DSPs
running at 200 MHz and 3 128Mbit RAMs for delay.
The processor shall support up to 15 RS-485 based
zone controllers and 8 Ethernet-based control
centers.
The Engineered Sound Processor shall be a
Bose
ControlSpace
ESP-88 Engineered Sound
Processor.
Safety and Regulatory
Compliance
The ControlSpace ESP-88 meets cUL (UL 6500
2nd edition), C-Tick, PSE and IEC60065, and has a
CB report including all country deviations. It meets
FCC Class B, Canadian ICES-003 Class B and
EN55103-1 and EN55103-2 EMC requirements.
Warranty
Five years.
Product Codes
ControlSpace ESP-88 120V - US PC 38214
ControlSpace ESP-88 230V - EU PC 38218
ControlSpace ESP-88 100V - JPN PC 38215
ControlSpace ESP-88 240V - UK/Sing PC 38216
ControlSpace ESP-88 240V- AU PC 38217
ControlSpace CC-64 control center PC 35624
ControlSpace CC-16 zone controller PC 35625
ControlSpace accessor
y pow
er supply PC 37823
Expansion Cards
ControlSpace
DSP expansion card PC 37535
ControlSpace
4x4 Mic/Line card PC 37533
ControlSpace
GPIO card PC 37534
ControlSpace
EDR 4 channel line out PC 37538
ControlSpace
EDR 4 channel line in
PC 37539
ControlSpace
AES input card
PC 37537
ControlSpace
AES output card PC 37356
Engineers and Architects
Specifications
The engineered sound processor shall be a
D
SP-based signal processor. The processor shall
include 8 general purpose control outputs and 8
general purpose inputs with expansion capabilities
for up to a total of 16 general purpose control
outputs and 16 general purpose inputs
Analog audio inputs and outputs shall be
electronically balanced. The maximum input
and
output levels shall be +24dBu. Analog inputs
shall be software switchable between microphone
and line-level inputs. Phantom power of +12V
shall be provided. A/D and D/A sections shall be
24 bit, 64x over-sampled
The processor shall include 8 analog inputs and
8 analog inputs but be expandable to a total of 64
audio channels in one 2U frame. The digital
signal
processing shall be performed by a Texas
Instruments
TM
S320C6713 DSP chip running at
200 MHz and utilizing 128Mbit of RAM for delay.
All processing shall be done with 32 bit resolution
and audio sampling shall be at 48 kHz.
The processor shall include Ethernet, RS-232
and RS-485 ports. Certifications shall include cUL,
c-tick and IEC60065, and have a CB report
including all country deviations. Processor and
peripherals and shall meet EN55103-1 and
EN55103-2 EMC requirements.
System shall include PC-based design, control,
and configuration software and comm
unicate with
the DSP and other par
ts of the system via Ethernet.
The processor and design software shall include
the following minimum set of processing modules:
Bose
®
speaker EQs, Bose crossovers, crossovers,
g
r
aphic and par
ametric EQs, routers, delays, matrix
mixers, signal generators, meters, compressor/
limiters
, duc
k
ers
, automatic gain controls
, gate
,
room combiner, and source selectors
The processor shall be capable of using a variety
audio cards including a 4x4 mic/line input/output
card, a 4 channel Enhanced Dynamic Range
output card, a 4 channel Enhanced Dynamic
Range input card and AES3 8-channel input and
output cards
.
Unit shall also suppor
t addition of a
©2005 Bose Corporation, The Mountain, Framingham, MA 01701-9168
USA CCM-000252 PC38788
Information subject to change without notice
Page view 3
1 2 3 4

Comments to this Manuals

No comments