Bose PM8500 / PM8500N PM8250 Specifications download pdf (Page 36)

Page 36 Installation and Operating Guide English

Installation and Operating Guide pro.Bose.com

Maintenance Operations

Updating Firmware and Speaker EQ Presets

Each PowerMatch

ampliﬁer contains two user-updatable ﬁles: Firmware and loudspeaker EQ ﬁles. These ﬁles can both be updated

from ControlSpace

Designer™ software using a PC connected to either the USB connection on the front panel of the ampliﬁer, or, in

the case of a network version ampliﬁer, an Ethernet network connection (use shielded CAT5e cable only).

Please refer to ControlSpace Designer software documentation on pro.Bose.com for software and USB driver installation instructions.

The ﬁrmware version of the ampliﬁer can be viewed directly on the ampliﬁer from the MAIN MENU < UTILITY < FIRMWARE VERSIONS

screen.

From within ControlSpace Designer software, this information can be found from the Window -> Scan function or from the device

property window. To view the device properties for a PowerMatch

ampliﬁer, right click the ampliﬁer block (in the Project View window)

and choose Properties.

Figure 14. Device properties window

When the ampliﬁer is connected to USB or a network connection, you can view and update both the Firmware and the EQ File version

from the System window as shown.

To obtain the newest version of the Firmware and EQ ﬁles, download the latest version of ControlSpace Designer software from

pro.Bose.com. Upon connection, you may be alerted of a newer version of ﬁrmware and/or EQ ﬁles and will be prompted for action.

To update ﬁrmware, select System -> Update Firmware. If a newer version is indicated under “Latest Version,” select the update check

box and click the Update button. You may need to reboot devices for the update to take effect.

Figure 15. Firmware Update window

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

No comments

Bose PM8500 / PM8500N PM8250 Specifications Page 36