Bose PM8500 / PM8500N PM8250 Specifications download pdf (Page 27)

English Installation and Operating Guide Page 27

pro.Bose.com Installation and Operating Guide

MAIN MENU < DSP < ARRAY EQ

DSP

Speaker Presets

Array EQ

Delay

Limiting

Description This display allows you to apply additional EQ to each input channel that feeds signal to RoomMatch

loudspeakers in array conﬁgurations.

Available Controls To access Array EQ, use the rotary encoder dial from the DSP menu to highlight, then press to select.

Navigation Soft Key: Back to DSP menu.

Menu Soft Key #5: Enables the selection of the input channel (or output groupings) using the rotary encoder dial.

Menu Soft Key #1: Enables the selection of RoomMatch modules within the array. Use the rotary encoder to adjust this parameter.

Menu Soft Key #2: Enables the total vertical angle of the array, in degrees, to be set. Use the rotary encoder to adjust this parameter.

Menu Soft Key #3: Enables Array EQ to be turned ON or OFF. Use the rotary encoder to toggle the desired state.

Options Modules: 2, 3, 4, 5, 6, 7, 8

V Angle: 20 to 100 degrees in 5-degree increments

Array EQ ON, Array EQ OFF

MAIN MENU < DSP < DELAY

DSP

Speaker Presets

Array EQ

Delay

Limiting

Description This display allows delay to be applied to each loudspeaker output.

Available Controls To access Delay, use the rotary encoder dial from the DSP menu to highlight and press to select.

Navigation Soft Key: Back to DSP menu.

Menu Soft Key #5: Enables the selection of the output channel (or output groupings) using the rotary encoder dial.

Menu Soft Key #1: Enables the selection of delay values, which are listed in meters, feet, milliseconds, and microseconds. Each press of this key

changes the highlighted unit/quantity. Secondarily, changing units allows for increased control of the delay range step size - when METERS is

highlighted, coarse control is possible while uSEC affords ﬁne control. Use the rotary encoder to adjust the selected parameter.

Menu Soft Key #4: Enables delay to be turned ON or OFF. Use the rotary encoder to toggle the desired state.

Options Delay time from 0 to 3000 milliseconds per output channel, increments dependant on selected delay unit/quantity

Delay ON, Delay OFF

➞

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

Bose PM8500 / PM8500N PM8250 Specifications Page 27