Model 1600-VI
Professional Stereo
Power Amplifier
Technical Information
Power Output:
Continuous Average Output Power,
both channels driven:
240 watts per channel into 8Ω from 20Hz
to 20kHz, with no more than 0.2% THD
325 watts per channel into 4Ω from 20Hz
to 20kHz, with no more than 0.2% THD
Bridged-mono operation:
700 watts into 8Ω from 20Hz to 20kHz,
with less than 0.2% THD
Voltage Output:
43.8V line voltage per channel into 8Ω
36.0V line voltage per channel into 4Ω
Dynamic Headroom:
2.0dB nominal
Power Bandwidth:
5Hz to 40kHz (+0dB, -3dB)
Frequency Response:
20Hz to 20kHz (±0.75dB)
Channel Separation:
(without Bose Input Module)
> 70dB @ 1kHz
> 60dB @ 10kHz
(with Bose Input Module, no EQ cards)
> 65dB @ 1kHz
> 55dB @ 10kHz
Input Impedance:
25kΩ unbalanced, each leg to ground
50kΩ balanced
Sensitivity:
High: 0.775V rms for rated power into
4Ω @ 1kHz
43mV rms for 1W into 4Ω @ 1kHz
Low: 1.5V rms for rated power into
4Ω at 1kHz
83mV rms for 1W into 4Ω @1kHz
Gain:
High: 33.3dB (±0.5dB)
Low: 27.6dB (±0.5dB)
Input Overload:
+18dBu
IM Distortion:
< 0.1%
THD:
@ 0.775V Sensitivity: < 0.2%
@ 1.5V Sensitivity: < 0.1%
Signal-to-Noise Ratio:
>100dB, A-weighted, referenced to rated
power into 4Ω (High gain)
> 79dBW, A-weighted, referenced to 1W
into 4Ω (High gain)
Slew Rate:
10V/µS (Bandwidth limited)
CMRR:
> 80dB @ 1kHz (without Bose Input
Module)
Power Consumption:
55W at idle
500W with musical program
1000W at full power into 8Ω (continuous)
1550W at full power into 4Ω (continuous)
Power Requirements:
120VAC/50-60Hz (USA and Canada)
230VAC/50-60Hz (Europe/UK)
240VAC/50-60Hz (Australia)
100VAC/50-60Hz (Japan)
Fusing:
10 Amp slo-blo (120V/60Hz)
7 Amp slo-blo (230V/50Hz)
Display:
7 LED indicators per channel:
1 green READY, 5 yellow SIGNAL,
1 red CLIP/PROTECT
Size (H x W x D):
3.5" (2U) x 19" x 13.25"
89 mm x 483 mm x 337 mm
Net Weight:
30 lb (13.6 kg)
Shipping Weight:
36 lb (16.3 kg)
General Description
The Bose
®
Model 1600-VI professional
stereo power amplifier is a high per-
formance amplifier designed for use with
all Bose Professional Products loud-
speaker systems. The unit offers high
power in a rugged, lightweight (30 lb)
package that is only two rack space
units (3.5") high. The amplifier is suitable
for portable or permanent installations.
The 1600-VI amplifier is a high powered,
two channel amplifier delivering 240
watts per channel into 8Ω, 325 watts per
channel into 4Ω, or 700 watts bridged
into 8Ω. The 1600-VI amplifier is de-
signed to accept Active Equalization
plug-in circuit cards for all Bose Profes-
sional Products loudspeakers, eliminat-
ing the need for a separate controller.
The Model 1600-VI amplifier includes
the standard EQ module, designed to
hold up to two EQ cards. An optional
ACM-1
amplifier control module, which
also holds up to two EQ cards, is
designed to establish network control of
the amplifier. This network link makes
remote operation of signal level and
power on/off functions possible. The
module also provides amplifier monitor-
ing capability. Using the graphical user
interface of the ACM-1 module software,
settings like amplifier output, output
load, and temperature can be checked
routinely.
The Model 1600-VI amplifier accepts both
balanced
and unbalanced inputs from
TRS, XLR or
stripped wire connections.
The rear panel
allows for an unused
parallel input or the actively equalized
line level output to be connected to
another device.
Model 1600-VI amplifier detailed installa-
tion and operating instructions are
provided in the Model 1800-VI and
1600-VI Professional Stereo Power
Amplifier Owner’s Guide.
System Configuration
Comments to this Manuals