Bose RoomMate II User Manual download pdf (Page 3)

produce heat. Avoid placing ihe

system in direct sunlight.

9. Power sources. The RoomMate U

system is available for connection to

AC lines (mains) of various voltages.

If your unit has a line voltage selector

switch on the back, make sure the

selector is in the correct setting, e.g.

setto 115VforU.S. and230Vfor

Europe.

The RoomMate II can also be con

nected to 12V DC voltage sources

such as the rechargeable Bose PC-1

powercase battery designed for use

with this system, as well as automo-

K/o or marine power sources. Ob-

\rvc the connections to the

source. Note: For portable applica

tions, the RoomMate II system should

be used only with ffie Bose PC-1

powercase.

10. Power cord protection. Route

the power supply (mains) cord so that

it will rtot be walked on. cut, or

pinched by items placed upon or

against it. Pay particular attention to

cord at plug, and at the point where it

connects with the RoomMate II

system.

11. Non-use periods. If the

RoomMate II system is not going to

be used for any length of time, unplug

it from the wall outlet. Always unplug

the unit by grasping the plug itself.

Never pull the plug out by the cord.

Also, if the system is connected to the

battery or other DC power source and

is not going to be used for several

hours or more, unplug the system

from the DC power source.

?2. Object and liquid entry. Take

care that objects do not fall and

liquids do not spill into the enclosure

of the RoomMate II system through

the openings.

13. Cleaning/care and mainte

nance. The RoomMate II system

requires very little maintenance.

Occasional cleaning should be done

with a damp cloth WHILE THE

SYSTEM IS UNPLUGGED. Never use

any chemicals to clean your system,

and never allow any liquids to enter

the unit’s openings.

14. Use with other systems. Do not

connect either the POWERED

speaker or the COMPANION speaker

to any other manufacturer's system.

15. Servicing. Never attempt to

service the RoomMate II system

yourself. There are no user service

able parts inside. Refer all servicing to

qualified personnel.

16. Damage requiring service.

Have your RoomMate II system

services by qualified service person

nel when any of the following occur:

A. The power supply cord or plug

has been damaged.

B. Objects have fallen onto or

liquid has spilled into the

enclosure.

C. The RoomMate II system has

been exposed to rain.

D. The system does not appear to

operate normally or shows a

marked change in perform-

manee.

E. The RoomMate II system has

been dropped or the enclo

sure damaged.

ATTENTION

This unit ts equipped with a polanzed

alternating current fíne plug (a plug havHTg

one blade wider than the other). Tlvs plug will

fit into the power outlet only one way. This is a

safety (eaiure. if you are unable to insert the

plug fully into the outlet, try reversing lite plug.

If ihe plug sivx/fd still fail to fH. coniaci your

electrician to replace your obsolete oullei.

Do noi defeat the safety purpose of the

polarized plug.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments