Bose Acoustimass 16 User Manual download pdf (Page 8)

Setting Up

Connecting the speakers

CAUTION:

Never connect the cube speaker arrays directly to a receiver output. Always con-

nect them to the powered Acoustimass

module, then connect the module to the receiver.

CAUTION:

Never use broken or frayed wiring, which can result in electrical shock or damage

to your system. The supplied cables are not intended for in-wall installation. Check local

building codes or enlist a qualiﬁed installer.

Connecting front cube speaker arrays to the Acoustimass module

Three individual 20-foot (6.1m) speaker cables connect the center, right, and left front cube

speaker arrays to the Acoustimass module (Figure 5). Be sure to match the correct cable with

the corresponding speaker location. Front speaker cables have blue RCA connectors at one

end with

(left),

(right), or

(center) molded into the connectors. The other ends of the

cables have two wires. The red collars on the + wire are labeled

LEFT

RIGHT

, or

CENTER

Note:

The center rear cube speaker array is included with the Acoustimass 16 system or may

be added to an Acoustimass 15 Series II system. For upgrading information, see “Upgrading

your Acoustimass 15 Series II speaker system” on page 12.

Figure 5

Cube speaker array

connections to the

Acoustimass module

Audio Output

Left

Rear

Center

Rear

Right

Rear

Left

Front

Center

Front

Right

Front

Audio Input

AM264924_00 _V.pdf • August 13, 2002

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments

Bose Acoustimass 16 User Manual Page 8

Comments to this Manuals

Related products and manuals for Acoustics Bose Acoustimass 16