Bose CINEMATE 1 SR Setup Guide download pdf (Page 11)

English – 11

SYSTEM SETUP

Step 2: Connect source audio to the AUX input

What you need for this step:

Note: If you currently have audio/video sources such as a cable/satellite set-top box and

a DVD player connected to your TV, do not disconnect them. The audio output from the

source should be connected to the TV and to the CineMate 1 SR speaker array. Refer to

“Product overview” on page 6.

A. Plug one end of the digital audio cable into the corresponding AUX connector on the

speaker array.

Note: If you are using an optical cable, be sure to remove the protective cover from the

plug. When inserting the plug into the connector, make sure it is pushed in all the way.

You may sense a slight resistance before you feel it click into place.

B. Plug the other end of the digital cable into the corresponding audio output connector

on the source.

Optical digital cable Coaxial digital cable

Coaxial

Digital audio

Optical

Digital audio

AUX

Hershey_Setup.book Page 11 Thursday, March 31, 2011 11:44 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

No comments

Bose CINEMATE 1 SR Setup Guide Page 11