Bose 701 Direct/reflecting series II Speakers Technical Information Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
AM257817_00_V.pdf October 25, 2001 7
Setting Up
Making the connections (cont.)
Figure 5
Wiring schematic
Press down the terminal tab on the bottom of the left main speaker to insert the appropriate
wire (Figure 5).
1. Connect one cord to the left speaker output of your receiver or amplier.
A. Insert the marked wire at one end to the red (+) terminal.
B. Insert the plain wire at that end to the black () terminal.
2. Connect the other end of the cord to the left (L) main speaker terminals (Figure 5).
A. Insert the marked wire into the red (+) terminal.
B. Insert the plain wire into the black () terminal.
3. Repeat steps 1 and 2 for the right (R) speaker connections.
Note:
The right speaker outputs are located on the left main speaker directly below the left
speaker outputs. They are labeled with an R.
Connecting the right accessory speaker to the left main speaker
Use the supplied Bose
®
interconnect cable to make this connection. It is important to note the
connector at each end is designed to be inserted in one orientation only. Match the curved
top of the connector to the curved top of the jack on the rear connector cups.
CAUTION:
Never connect the right accessory speaker directly to a receiver output. Always
connect the right accessory speaker to the left main speaker, then connect the left main
speaker to the receiver.
Figure 6
Connecting the right acces-
sory speaker to the left
main speaker
L
R
125/115C
225W
Power
Output
Input
LFE/
Subwoofer
L
R
er
Output
Input
LFE/
Subwoofer
L
R
L
R
Left main speaker
Receiver
125/115C
225W
Power
Output
Input
LFE/
Subwoofer
L
R
Power
Output
Inpu
Left main speaker
Right accessory speaker
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments