Bose ESP-00 Series II User Manual download pdf (Page 5)

ControlSpace

ESP-00 Series II

engineered sound processor

TECHNICAL DATA SHEET

All information subject to change without notice.

® 2015 Bose Corporation

All trademarks are those of their respective owners.

Bose Professional Systems Division

OF 6

pro.Bose.com

Software Information

Bose® ControlSpace® Designer™ software is used for the design,

configuration, real-time operation and monitoring of a system

containing selected Bose system electronics and control centers.

Using a standard drag-and-drop user interface, ControlSpace

Designer software offers the flexibility to quickly and accurately

configure signal processing functions within processors, and to

develop complex control programming for system operation.

When actively connected to the system ControlSpace Designer

software can be used to either control and operate the system

in real time for system set-up and optimization, or may be used

as a system monitor. When configured for monitor mode device

parameters are protected and the system operator only has

access to virtual control panels and amplifier monitor functions.

Parameter sets provide the ability to program and recall system

settings ranging from an individual signal processing parameter

to a complete system setup; while Group controls provide master

volume control of multiple gains, or control of multiple instances of

the same signal processing function type. Both Parameter set and

Group programming functions are easily mapped to the physical

controls of a Bose control center, or may be invoked remotely

using a standard serial protocol or general purpose inputs.

Smart Simulation programming enables designers to test and

modify system control programming while off-line, eliminating

the need to connect to the actual system to configure and test

system control programming. Virtual control centers are included

to test system operation, and all parameter set, group and

general purpose input and outputs may be tested using the Smart

Simulation.

Integrated Dante routing, configuration and monitoring streamline

setup and control of optional Dante networked audio components.

Minimum System Requirements

The following are the minimum system requirements for

ControlSpace® Designer™ 4.0

Processor:

1GHz processor (or better)

RAM:

512MB of RAM available (1GB recommended)

Disc Space:

512MB of disk space available (1GB recommended)

Ports Required:

1 USB, 1 network port (Wired LAN, Ethernet, 100 Mb minimum, or

wireless LAN 802.11g/n)

Expansion Cards

ControlSpace® ESP-00 4-channel mic/line input card II

Provides four high-quality analog input channels, accommodating

a wide range of signals from both line-level devices and

microphones using software-selectable gain control up to 64 dB

and switchable +48 VDC* phantom power.

Product Code: 638298-0010

ControlSpace® ESP-00 4-channel line output card II

Provides four high-quality analog line-level output channels. The

card inserts into one of eight expansion card slots on the ESP-00

II processor.

Product Code: 638299-0010

ControlSpace® ESP-00 ESPLink 8-channel output card

Provides eight channels of digital audio over a single optical cable

for sending audio to one or more ESPLink-equipped PowerMatch®

amplifiers.

Product Code: 350513-0010

ControlSpace® ESP-00 Dante™ network card

Provides up to 32 channels (16 input and 16 output) of low-latency

digital audio using the Dante audio networking solution from

Audinate®.

Product Code: 359843-0020

ControlSpace® ESP-00 CobraNet® I/O expansion card

Provides up to 32 channels (16 input and 16 output) of digital

audio using CobraNet audio networking technology.

Product Code: 311506

ControlSpace® ESP-00 AES3 eight-channel input card

Provides eight channels of AES3 digital audio input.

Product Code: 041765

ControlSpace® ESP-00 AES3 eight-channel output card

Provides eight channels of AES3 digital audio output.

Product Code: 041766

Architects’ and Engineers’

Specifications

The engineered sound processor shall be an open-architecture

card-frame based audio signal processor with eight open card

slots for audio expansion and one open card slot to double control

general-purpose input and output connections.

The digital signal processing shall be performed by four Texas

Instruments® brand TMS320C6713 DSP chips running at 200

MHz, supporting floating-point calculations at 6.4 GIPS / 4.8

GFLOPS, and utilizing a total of 64MB of RAM (288 seconds of

buffer) for delay operations. All processing shall be done at 32-bit

resolution, and audio sampling shall be at 48 kHz/24-bit. System

latency, from input to output, shall not exceed 860 microseconds.

The front panel shall include LED indication for POWER, STATUS,

ETHERNET, and SERIAL. Optional audio cards shall provide LED

signal level indication on a per channel basis.

The engineered sound processor shall support eight user-

installable audio cards with the total capacity of up to 64 audio

channels. Compatible audio card options shall include analog

microphone/line level input, analog line level output, AES3 input,

AES3 output, Dolby® and DTS® surround sound decoding, a

proprietary Bose ESPLink output card for use with PowerMatch®

amplifiers, and 32-channel audio networking card options:

CobraNet® or Dante™.

Design, configuration and real-time control/monitoring shall

be provided through a rear RJ-45 network connector using

standard 10 Mbit/s (or faster) Ethernet connections and Bose®

ControlSpace® Designer™ software. The PC-based ControlSpace

Designer software shall enable the following minimum set of

processing modules: Bose® Professional loudspeaker EQs,

crossovers, graphic and parametric EQs, routers, delays, matrix

mixers, automatic microphone mixer, signal generators, meters,

compressor/limiters, duckers, automatic gain controls, gate, room

combiner and source selectors. The software shall allow full

IP addressability of the processor with password protection of

system files.

The engineered sound processor shall include external control

capability through serial (RS-232 or Ethernet port), Bose CC-16

1 2 3 4 5 6

Comments to this Manuals

No comments

Bose ESP-00 Series II User Manual Page 5

Comments to this Manuals

Related products and manuals for Processors Bose ESP-00 Series II