Bose Acoustic Wave Music System II User Manual download pdf (Page 2)

Furman’s Home Theater Series Power

Conditioners offer many of the same

features that have made our power

products preeminent within the music,

broadcast, and contractor industries

for decades. Now, many of our stan-

dard features such as retractable rack

lights and over-under voltage shutdown,

are available with laboratory quality

Digital True RMS Voltage/Current

meters. Additionally, the HT-Series

has been optimized for today’s ultra

sensitive digital circuitry and high speed

converters. All HT series AC lters

and Transient Surge Suppressors fea-

ture our zero ground contamination

technology. This is critical for optimized

performance and trouble free performance.

Power line disturbances are real, and

they are inevitable. Many areas may

experience over one-hundred small

transient spikes a day. Additionally,

most spikes are caused by your util-

ity and manufacturing machinery,

not dramatic events such as lightning

storms. Proper protection is essential

for costly equipment, but there is

a wide range of differences in surge

suppressors and their effect on Audio/

Video performance. In fact, typical

Surge suppressors can cause more

harm than good, by leaking the very

voltage they suppress back to your sig-

nal ground! This may cause equipment

failure over time, and will always com-

promise performance in today’s Home

Theater circuits.



20 Amp (2400 Watt) rating handles even

the largest ampliers and powered sub-

woofers



Multiple levels of protection compo-

nents can safely absorb large spikes

and provide highly effective RF ltering



Extreme Voltage Shutdown guards

against destructive wiring faults



Critical functions are monitored by a

“smart” microprocessor; while LED

status indicators report problems



Eight widely-spaced, switched rear

outlets and one unswitched front outlet



Precision thermal circuit breaker



Heavy duty 10 foot, 12 gauge line cord

PS-PRO HT

FEATURES:

The PS-PRO HT Power Conditioner/Sequencer is

capable of powering up a rack full of equipment in a 3-step

delayed sequence. The sequence is reversed for power-

down. The sequence can be initiated with either momentary

or maintained switches, locally or remotely. A duplex outlet

is provided for each delay step. A front panel screwdriver

adjustment sets the delay time. A locking switch with a

removable key is provided for maximum security. One or

more PS-PRO HT’s may be installed in remote locations

and operated via low-voltage wiring.

The PS-PRO HT is an AC power conditioner as well. What

sets the PS-PRO HT apart from other conditioners is the

quality and conguration of the suppression devices used.

These include MOV’s, gas discharge tubes, fast-blow fuses,

and high voltage capacitors. This unique combination

can safely absorb and dissipate large spikes from nearby

lightning strikes and other sources, as well as highly attenu-

ate audible and visible high frequency noise. An additional

feature, Extreme Voltage Shutdown, guards against wiring

faults – such as an accidental open of the Neutral wiring.

It senses voltages that are so high that operation would be

impossible (over 140V) and shuts the power down before

damage can occur. LED status indicator (“Protection OK”)

monitors the integrity of the protection devices, and reports

if the protection is compromised. The PS-PRO HT is a 19"

single space rack mount unit that comes with a ten-foot, 12

AWG power cord, and has eight widely-spaced rear outlets

that can accommodate bulky plug-mounted power supplies,

as well as a front-panel switched convenience AC outlet.

PS-PRO HT SPECIFICATIONS

Current rating: 20 Amps (2400 Watts at 120 VAC)

Input Voltage: 85 to 264 VAC

Meter Accuracy: Voltmeter: ±2 VAC; Ammeter: ±2 amps, cali-

brated with trimpot adjustments

Spike Protection Modes: Line to neutral

Spike Clamping Voltage: TVSS rating 400V peak, L-N

(tested to UL 1449)

Response time: 1 nanosecond

Maximum surge current: 11,000 amps (8 x 20mS pulse)

Maximum spike energy: 180 joules total

Noise attenuation: Differential mode: Greater than 40 dB,

1 to 200 MHz

Mechanical: Dimensions: 1.75" H x 19" W x 10" D.

Weight: 6 lbs (2.7 kg).

Construction: Steel chassis, zinc chromate plating; .125" brushed

and black anodized aluminum front panel; glass epoxy printed circuit

boards.

Power Consumption: 6 watts

Safety Agency Approvals: UL, C-UL, listed.

After years on the road,

we are nally coming home.

1 2 3 4

Comments to this Manuals

No comments

Bose Acoustic Wave Music System II User Manual Page 2

Comments to this Manuals