Bose Lifestyle 30 Series II User Manual download pdf (Page 11)

AM199736_06_V.pdf October 28, 2001 9

Setting Up

Connecting the speakers and Lifestyle

music center

Once you have selected locations for your music system, connect the speakers.

CAUTION:

Make sure all components are unplugged from the power outlet before you

begin hooking up the system.

Connecting the Jewel Cube

speakers to the Acoustimass

module

1. Match the correct cable to the corresponding speaker location.

• Front speaker cables have blue RCA connectors at one end, with L, R, or C molded

into both the RCA connectors and the Jewel Cube connectors at the other end.

• Surround speaker cables have orange RCA connectors at one end, with L or R molded

into both the RCA connectors and the Jewel Cube connectors at the other end.

2. Insert the Jewel Cube connector of each cable fully into the jack on the rear of one of the

five speakers (Figure 5). Match the ridge of the connector to the notch at the top of the

jack.

3. Connect each cable to the corresponding jack on the Acoustimass module.

a. Plug the blue connectors into the matching left front, center, and right front jacks.

b. Plug the orange connectors into the matching left surround and right surround jacks.

To lengthen the cable, connect speaker wire with male phono (RCA) plugs on each end to

your supplied speaker cable. Use a female-to-female adapter (“barrel” connector) or splice in

18-gauge (0.75 mm

) or thicker cord (connecting + to + and – to –). To purchase extension

wire, see your dealer or electronics store, or call Bose

customer service.

Figure 5

Speaker cable connections to

the Jewel Cube speaker

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 42 43

No comments

Bose Lifestyle 30 Series II User Manual Page 11