Bose 901 User Manual download pdf (Page 10)

the RIGHT channel EQUALIZER OUTPUT terminal on the

Equalizer to the RIGHT or B channel INPUT terminal on

your power amplifier.

4. Similarly, use a second cable and connect the

LEFT channel EQUALIZER OUTPUT to the 1-EFT or A

channel INPUT terminal on the power amplifier,

5, Using a third cable, connect the RIGHT channel

EQUALIZER INPUT terminal on the Equalizer to the

RIGHT or B channel OUTPUT terminal on your nreamp

(the preamp terminal may adternatively be labeled PREAMP OUT

or OUTPUT TO AMPLIFIER).

6. Similarly, using a fourth cable connect the

LEFT channel EQUALIZER INPUT terminal to the LEFT

or A channel OUTPUT terminal on your preamp.

7, Connect the Equalizer power cord to an AC re

ceptacle. You may prefer to use a receotacle on your

preamp so that the Equalizer will be automatically switched

on or off by the power switch on the preamp.

The Equalizer is now installed in your system. No other

connections should be made to the Equalizer. If you have a tape

recorder, it is connected to the preamp in the normal manner de

scribed in the preamp and recorder manuals. THE REMAINING

STEPS SHOULD BE FOLLOWED TO INSURE PROPER INSTALLA

TION AND OPERATION.

8. Place the TAPE switch on the Equalizer to the

NORMAL position. This switch should be left permanently

in this position when the Equalizer is connected as de

scribed in this section. Place the three frequency contour

controls so they coincide with the indicated dots. These

are the “normal" positions of the controls.

9. Turn the Equalizer and the rest of the system on.

The pilot lamp in the Equalizer POWER switch should light.

- 9 -

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

No comments

Bose 901 User Manual Page 10