Bose ESP-00 Series II User Manual download pdf (Page 7)

ControlSpace

ESP-00 Series II

engineered sound processor

TECHNICAL DATA SHEET

All information subject to change without notice.

® 2013 Bose Corporation

All trademarks are those of their respective owners.

Bose Professional Systems Division

OF 7

pro.Bose.com

slots for audio expansion and one open card slot to double control

general-purpose input and output connections.

The digital signal processing shall be performed by four Texas

Instruments

brand TMS320C6713 DSP chips running at 200

MHz, supporting floating-point calculations at 6.4 GIPS / 4.8

GFLOPS, and utilizing a total of 64MB of RAM (288 seconds of

buffer) for delay operations. All processing shall be done at 32-bit

resolution, and audio sampling shall be at 48 kHz/24-bit. System

latency, from input to output, shall not exceed 860 microseconds.

The front panel shall include LED indication for POWER, STATUS,

ETHERNET, and SERIAL. Optional audio cards shall provide LED

signal level indication on a per channel basis.

The engineered sound processor shall support eight user-

installable audio cards with the total capacity of up to 64 audio

channels. Compatible audio card options shall include analog

microphone/line level input, analog line level output, AES3 input,

AES3 output, Dolby® and DTS® surround sound decoding, a

proprietary Bose ESPLink output card for use with PowerMatch®

amplifiers, and 32-channel audio networking card options

CobraNet®, Dante™ or AVB.

Design, configuration and real-time control/monitoring shall

be provided through a rear RJ-45 network connector using

standard 10 Mbit/s (or faster) Ethernet connections and

Bose® ControlSpace® Designer™ software. The PC-based

ControlSpace Designer software shall enable the following

minimum set of processing modules: Bose® Professional

loudspeaker EQs, crossovers, graphic and parametric EQs,

routers, delays, matrix mixers, automatic microphone mixer, signal

generators, meters, compressor/limiters, duckers, automatic gain

controls, gate, room combiner and source selectors. The software

shall allow full IP addressability of the processor with password

protection of system files.

The engineered sound processor shall include external control

capability through serial (RS-232 or Ethernet port), Bose CC-16

device control, and eight general-purpose control outputs and

eight general-purpose inputs that can be expanded for a total

of 16 general-purpose control outputs and 16 general-purpose

inputs. The engineered sound processor shall be compatible for

use with Bose CC-64, CC-16, and CC-4 user control interfaces.

All signal-processing modules, parameter sets and groups shall

be directly controllable by Bose user interfaces, generic switches

and 10k potentiometers, and third-party control systems (using a

published serial protocol). It shall also be possible to flag signal

processing modules in the design file for which asynchronous

serial communication feedback can be requested by external

control system devices. The processor shall provide a real-time

clock (RTC) by which automated events can be scheduled using

the configuration software.

The processor shall be constructed of painted steel with a black

durable chassis finish and brushed aluminum front panel. The

processor shall allow for 19-inch (483 mm) EIA-310 standard

rack mounting using the pre-installed rack ears. The processor

dimensions shall be 3.5 inches in height (88 mm, 2RU) and 13.0

inches (331 mm) in depth. The processor shall weigh 10.8 pounds

(4.9 kg).

The processor shall have a universal auto switching power supply

capable of accepting input voltages from 85 VAC to 264 VAC,

50 Hz to 60 Hz, and be able to operate in ambient temperatures

up to 95ºF (35ºC). Power consumption shall be less than 75

W. Certifications shall include cUL, C-Tick, PSE and IEC/EN

60065, and have a CB report including all country deviations. The

processor shall meet FCC Class A, Canadian ICES-003 Class A

and EN55103-1 and EN55103-2 EMC requirements.

The engineered sound processor shall be the Bose

ControlSpace® ESP-00 Series II engineered sound processor.

Safety and Regulatory Compliance

The ControlSpace ESP-00 Series II engineered sound processor

meets cUL (UL 60065 7th edition), C-Tick, PSE and IEC/EN

60065 7th edition, and has a CB report including all country

deviations. It meets FCC Class A, Canadian ICES-003 Class A

and EN55103-1 and EN55103-2 EMC requirements.

Product Codes

ESP-00 II

ControlSpace ESP-00 II 120V – US 370610-1110

ControlSpace ESP-00 II 230V – EU 370610-2110

ControlSpace ESP-00 II 100V – JPN 370610-3110

ControlSpace ESP-00 II 230V – UK/Sing 370610-4110

ControlSpace ESP-00 II 240V – AU 370610-5110

Accessories

ControlSpace CC-64 control center 041760

ControlSpace CC-16 zone controller 041761

ControlSpace CC-4 room controller 042023

ControlSpace CC-PS1 universal power

supply

371407-0010

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Bose ESP-00 Series II User Manual Page 7

Comments to this Manuals

Related products and manuals for Processors Bose ESP-00 Series II