62
APPENDIX
Obtaining System Information from the Media Center Display
You can obtain system information directly from the media center display by pressing a few
buttons. Follow the steps below.
- Connect the media center and bass module as instructed in the owner’s guide.
- Connect the system to AC mains.
- With the media center turned off, press and hold the ENTER button on the media center.
- When holding down the ENTER button, pressing the ON/OFF button will bring up the console
system information on the console display. For each additional press of the ON/OFF button,
you will get additional information. See the list below.
- Once you are done viewing the information, press the POWER button to clear the display.
Video Format: Press the ON/OFF button down once. You should see the video format informa-
tion, similar to VIDEO: NTSC COMPOSITE + S. This indicates the video format the console is
set to.
Console Software Revision: Press the ON/OFF button a second time. You should see the
console software revision, similar to CON: 01.01.05, which indicates that the console software
revision is 01.01.05.
Console Variant Information: Press the ON/OFF button a third time. You should see the
console variant information, similar to the following. CONSOLE VARIANT: 129.
Bass Module Software Revision: Press the ON/OFF button a fourth time. You should see the
bass module software revision level, similar to BASS BOX SOFTWARE: 0101BF.
Tuner PCB Sofware Revision: Press the ON/OFF button a fifth time. You should see the tuner
software revision level, similar to TUNER SOFTWARE: 01.00.BC.
Console Serial Number: Press the ON/OFF button a sixth time. You should see the console
serial number level, similar to CONSOLE SERIAL #: 035666941400018AZ.
Console Main PCB Serial Number: Press the ON/OFF button a seventh time. You should see
the main PCB serial number, similar to MAIN BOARD SERIAL #: xxxxxxxxxxx274256xx0001.
Console Tuner PCB Serial Number: Press the ON/OFF button an eighth time. You should see
the tuner PCB serial number, similar to TUNER BOARD SERIAL #: xxxxxxxxxxx274257xx0001.
Console Region Code Setting: Press the ON/OFF button a ninth time. You should see the
console region code setting, similar to DVD REGION CODE 1.
Console DVD Drive Software Revision and Hardware Information: Press the ON/OFF
button a tenth time. You should see the DVD drive software level and drive information, similar
to DVD DRIVE: 1B10 IBA DVD-ROM SD-M1712.
Console Main PCB Test Information: Press the ON/OFF button an eleventh time. You should
see the test information for the console main PCB, similar to MAIN BD FUNCTIONAL: PASSED.
Console Tuner PCB Alignment Information: Press the ON/OFF button a twelfth time. You
should see the tuner PCB alignment information, similar to TUNER BD ALIGNMENT: FF.
Console Serial Port (BoseLink Port ) Information: Press the ON/OFF button a thirteenth
time. You should see the serial port information, similar to SERIAL PORT: SMART SPEAKER.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals