Bose VS-2 User Manual download pdf (Page 11)

English Deutsch FrançaisDansk Español Italiano SvenskaNederlands

Choosing connection types for your A/V devices

1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.

2. In the following table, choose the type of available video connector that provides the highest possi-

ble video quality. We recommend using a component connection if it is available. Place a check mark in

the table for the connector type used for each of your A/V devices.

Connecting your A/V devices to the VS-2

1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V device. If

you are making a component connection, be sure to match the color of the plug to the color of the

connector.

2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2. Again,

if you are making a component connection, be sure to match the color of the plug to the color of the con-

nector.

3. Refer to your LIFESTYLE

system installation guide for information on making audio connections.

Video

Quality

Video

Connector VCR CBL-SAT

AUX

(Other)

Better Component

Good S-Video

Standard Composite

VS-2

If any of your A/V devices do not have component video connectors, you can use

either an S-Video or Composite connection. Remember, the VS-2 converts either

of these up to component video format.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Bose VS-2 User Manual Page 11