Bose Lifestyle VS-1 Specifications download pdf (Page 9)

For a Component Connection Between Your TV and the VS-1

Choosing connection types for your video sources

1. Look at the rear panel of all your sources to determine what types of video output con-

nectors they have.

2. In the following table, check off the type of video input connection you plan to use for

each of your video sources. Choose the type of connection that provides the highest

level of video image quality. We recommend using a component connection if it is

available.

Connecting your sources to the VS-1

1. Plug one end of the appropriate video cable into the selected jack(s) on your video

source. If you are making a component connection, be sure to match the color of the

plug to the color of the jack.

2. Plug the other end of the video cable into the appropriate Video INPUT jack(s) on the

VS-1. Again, if you are making a component connection, be sure to match the color of

the plug to the color of the jack.

3. Turn to “Source Audio Connections” on page 14.

VCR CBL-SAT

AUX

(Other)

Connection

type

Video

Quality

Component Best

S-Video Good

Composite Standard

If any of your sources do not have component video jacks, you can use

either an S-Video or Composite connection. Remember, the VS-1 converts

either of these up to component video format.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Bose Lifestyle VS-1 Specifications Page 9