Bose Lifestyle VS-1 Specifications download pdf (Page 16)

Operating Information

Updating the system software

Your DVD home entertainment system might need a software update to enable it to

operate the VS-1. For example, if you cannot see a picture on your TV after installing

the VS-1, you need to update the system software. A software update disc is

included in the carton with your VS-1.

To run the software update disc:

1. Turn on your LIFESTYLE

system.

2. Load the software update disc into the disc player.

3. Follow the instructions included with the software update disc.

Activating component video

To use a component video connection between your TV and media center, complete

the following steps to enable your media center to output component video signals.

This must be done before you can view any video image on your TV.

1. Make sure your media center is turned off.

2. Lift up the front door of the media center to access the control buttons.

3. Press and hold Enter.

4. Press Store as many times as necessary until VIDEO appears on the media

center display.

5. Release the Enter button.

6. Press Volume up or down until the video setting you want is displayed:

• NTSC COMPONENT – for a component only connection in North America

• PAL COMPONENT – for a component only connection outside North America

• NTSC PROGRESSIVE – for a component connection and progressive scan in

North America (PAL progressive is not supported)

7. Press Store to confirm the selection and return the system to normal operation.

Front panel door – lifts up

Display window

Disc tray

Media center

control buttons

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Bose Lifestyle VS-1 Specifications Page 16