Bose ControlSpace ESP-88 Installation Guide download pdf (Page 6)

1. Mic/line inputs (ESP-88 only)

Fourbalancedmic/lineinputs(audioinput

connectors are green) in slots 1 and 3.

These are inputs S1-1 through S1-4, and

S3-1 through S3-4 in the ControlSpace

™

Designer software.

2. Line outputs (ESP-88 only)

Four balanced line outputs (audio output

connectors are oran ge) in slots 2 and 4.

These are outputs S2-1 through S2-4

and S4-1 through S4-4 in the Designer

software.

3. RS-232C connector

DB-9 male (DTE)

4. RS-485 connector

ConnectControlSpaceCC-16

controllers.

5. GPIO card

Eight general purpose control inputs

Eight general purpose control outputs

6. GPIO slot 2

For optional 2nd GPIO card

7. Power switch

ON/OFFACpower

8. AC cord inlet

Connect the AC cord appropriate for your

area.

9. Ethernet LAN connector

Connect to your PC with enclosed cross-

over cable. Or, connect directly to a hub

or router with a straight-through cable.

10. Audio slots 5 - 8

For optional audio cards

RS-232C Serial Port

The ESP features a serial port that can be used to send

to other equipment. The serial port is a DB9 male. The

pin-out is shown in this illustration.

Rear Panel Controls and Connections

Rear Panel

(ESP-88shownESP-00doesnotincludeI/Ocardsandmustbeconguredseparately.)

male

DB9

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Bose ControlSpace ESP-88 Installation Guide Page 6

Comments to this Manuals

Related products and manuals for Recording Equipment Bose ControlSpace ESP-88