Bose Acoustic Wave Music System II User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
PL-HT SPECIFICATIONS
Current rating: 15 amps, 1800 watts at 120 VAC
Input Voltage: 0 to 135 VAC without damage
Meter Accuracy: Voltmeter: +/- 1 VAC; Ammeter: +/- 0.1 amps
Spike Protection Modes: Line to Neutral
Clamping Voltage, all modes: Initial turn-on at 200 volts; TVSS rat-
ing of 400 volts peak at 500 amps, L-N (tested to UL-1449)
Response time: 1 nanosecond
Maximum surge current: 6,500 amps
Maximum spike energy: 80 joules
Noise attenuation: Differential mode: Greater than 40 dB, 1 to 200 MHz
Dimensions: 1.75" H x 19" W x 8" D.
Weight: 6 lbs (2.7 kg).
Construction: Steel chassis, zinc chromate plating; .125" brushed and
black anodized aluminum front panel; glass epoxy circuit boards.
Power consumption: 12 watts
Safety Information: The PL-HT is N.R.T.L.-C listed.
20 amp / 2400 watt rating precision
magnetic high in-rush circuit breaker
handles even the largest power ampli-
ers and powered sub-woofers
Laboratory precision grade digital volt
meter and true RMS volt / current meter
(+/- 1 VAC, +/- 0.1 amp)
Multiple levels of protection compo-
nents can safely absorb large spikes
and provide highly effective RFI/EMI l-
tering, incorporating Furman’s HT series
zero ground contamination technology
Extreme Voltage Shutdown guards
against destructive wiring faults
Two slide-out, swiveling light xtures for
rack illumination with dimmer control
for lamp brightness (this feature is not
present in the PL-HT)
(9) accessory outlets, (4) for analog com-
ponents, (4) with additional ltering for
digital components, (1) 15 A front panel
mounted convenience outlet
FEATURES:
What sets the PL-PRO HT apart from other conditioners is the quality, and conguration of the suppression de-
vices used. These include MOV’s, gas discharge tubes, fast-blow fuses, and high voltage capacitors. This unique
combination can safely absorb and dissipate large spikes from nearby lightning strikes and other sources, as well
as highly attenuate audible and visible high frequency noise. Precise high-inrush magnetic circuit breakers avoid
the false tripping often encountered with large reactive loads like power ampliers and powered sub-woofers. An
additional feature, Extreme Voltage Shutdown, guards against wiring faults – such as an accidental open of the
Neutral wiring. It senses voltages that are so high that operation would be impossible (over 140V) and shuts the
power down before damage can occur. LED status indicator (“Protection OK”) monitors the integrity of the protec-
tion devices, and reports if the protection is compromised.
The PL-PRO HT is a 19" single space rack mount unit, featuring the familiar slide-out rack lights pioneered by
Furman. These light modules utilize micro switches to turn each light tube off or on automatically when pushed
in or pulled out. The PL-PRO HT is also supplied with True R.M.S. digital volt and current metering, which sup-
ply a highly accurate, reliable indication of voltage or current draw even for highly nonlinear loads like ampliers,
switching power supplies, or when the incoming AC line is distorted. The PL-PRO HT comes with a ten-foot, 12
AWG power cord, and has eight widely-spaced rear outlets that can accommodate bulky plug-mounted power
supplies, as well as a front-panel switched convenience AC outlet.
PL-PRO HT SPECIFICATIONS:
Current rating: 20 amps, 2400 watts at 120 VAC
Input Voltage Range: 0 to 250 VAC without damage
Meter Accuracy: Voltmeter: +/- 1 VAC; Ammeter: +/- 0.1 amps
Spike Protection Modes: Line to Neutral
Clamping Voltage, all modes: Initial turn-on at 200 volts; TVSS rat-
ing 400V peak at 500 amps, L-N (tested to UL1449) (TVSS rating
400V peak)
Response time: 1 nanosecond
Maximum surge current: 11,000 amps (8 x 20 mS pulse)
Maximum spike energy: 180 joules total
Noise attenuation: Differential mode: Greater than 40 dB, 1 to 200 MHz
Dimensions: 1.75" (4.45 cm) H x 19" (48.25 cm) W x 10" (25 cm) D
Weight: 6 lbs (2.7 kg)
Construction: Steel chassis, zinc chromate plating; brushed and black;
Anodized aluminum front panel; glass epoxy printed circuit boards.
Power consumption: 12 watts
Safety Information: The PL-PRO HT is N.R.T.L.-C listed.
15 amp / 1800 watt rating, with thermal
circuit breaker
Laboratory precision grade digital
true RMS volt / current meter
(+/- 1 VAC, +/- 0.1 amp)
Two slide-out, swiveling light xtures
for rack illumination with dimmer con-
trol for lamp brightness
(8) accessory outlets, (4) for analog
components and (4) with additional
ltering for digital components
Ground Contamination free surge pro-
tection and RFI/EMI ltering
Ten foot heavy duty AC cord
FEATURES:
The PL-HT Power Conditioner/Light Module is the perfect accessory to any equipment rack, providing the basic
power protection essential to every audio or video system. Install a PL-HT in the top slot of your rack, and the
eight switched AC outlets on the rear panel will power all your equipment while its two slide-out light xtures
provide discreet, illumination of their controls in any dark place. A dimmer control lets you adjust the lamp bright-
ness to just the right level.
The Metered Six 15 Amp Series protects your delicate electronic equipment by combining a high voltage surge
and transient suppressor with an RFI/EMI interference lter. The fast-acting suppression circuit responds in
nanoseconds, clamping spikes and surges to safe levels. The lter works to prevent noise from uorescent lights,
electric motors, radio transmitters, and similar sources of “electronic pollution” from leaking from the AC line into
sensitive analog or digital circuits.
The PL-HT lamp comes supplied with 5-watt night-light bulbs. Replacements are readily available in 4-watt sizes
at most supermarkets and hardware stores. Colored Christmas tree bulbs may also be used. Bulbs are easily
replaced without removing the unit from the rack by unscrewing the cap on the end of each light tube. The PL-HT
features a master switch for the rear outlets. This switch glows red when the power is on. There is also a separate
switch for the lamps, allowing you to check your equipment settings before applying power to it. The front-panel
circuit breaker can be easily and quickly reset should any of these units be overloaded.
PL-PRO HT
20 AMP
PL-HT
15 AMP
Page view 2
1 2 3 4

Comments to this Manuals

No comments