Bose Soundlink AM323699 Technical Information download pdf (Page 13)

English - 13

Operation

Connecting a device using the AUX connector

You can use your speaker with any device that features a headphone or audio

output. This feature requires using a stereo audio cable with a 3.5 mm plug on

one end to connect to the AUX IN input

on the speaker. This type of cable is

available for purchase at electronics stores.

To use the AUX IN connector:

1. Plug the cable from your audio device into the AUX IN connector

on the

back of the speaker.

2. Press Power

on the speaker.

3. Press

AUX on the speaker.

4. Adjust the volume on the connected device to near maximum, then use

the speaker volume buttons to adjust the volume level.

Notes:

• If the connected device stops playing audio for 30 minutes, the speaker

automatically turns off to conserve battery power.

• The SERVICE connector on the back of the speaker is only for software updates.

It cannot be used to connect an audio device.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Bose Soundlink AM323699 Technical Information Page 13