Bose SL12 Operations Instructions download pdf (Page 6)

YOUR SL2 WIRELESS SURROUND LINK

EnglishDeutschFrançais DanskEspañolItalianoSvenska Nederlands

Making the connections

Use the small power pack with the SL2 transmitter (Figure 3). The large power pack is for use

with the SL2 receiver.

Figure 3

Different power

supplies

Transmitter

power pack

Receiver

power pack

SL2 transmitter

SL2

rece

ver

Input jack

Output jacks

AC power jack

Before you plug either of the supplied power packs into the wall, make all the other

connections.

Connecting the SL2 transmitter

Use the supplied transmitter cable to connect the SL2 transmitter to your Acoustimass

module,

as follows (Figure 4):

1. Insert the single connector at one end of the cable into the input jack labeled

Acoustimass

Module on the back of the SL2 transmitter.

2. Connect the other end of the transmitter cable to jacks on the Acoustimass module.

• Insert the purple connector marked RR into the jack labeled Right Rear or Surround R.

• Insert the green connector marked LR into the jack labeled Left Rear or Surround L.

3. Connect the cable end of the transmitter power pack to the small jack labeled DC Power

on the back of the SL2 transmitter.

4. Plug the transmitter power pack into a nearby AC mains outlet.

Figure 4

Transmitter

connections

Transmitter

cable

SL2 transmitter

Transmitter

power

pack

(120V

shown)

Acoustimass module

Surround

speaker jacks

Status LED

When the power supply is plugged in, a Status LED on the back of the transmitter blinks

green until it links to the receiver. It then lights a solid orange until there is an audio signal to

transmit.

00_CatapultOG.book Page 6 Thursday, October 26, 2006 4:07 PM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Bose SL12 Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Portable speakers Bose SL12